DXF / SVG / GeneratorsFiles. Tools. Possibilities.
EN
Saved0
Birch plywood panel with a cut-out salmon inside a frame, curved caps on top and bottom, standing on a wooden tableVisualization
DW-300022 · UPDATED 11/20/2026

Salmon Wall Sconce SVG, Fish Light Panel DXF, Fishing Cabin Lamp Cut File, Salmon Silhouette Wall Decor

A salmon sconce front: a rectangular frame with a detailed salmon joined at its nose and tail, plus two shallow curved caps for the top and bottom, 3 pieces in all. It comes free as one SVG and one DXF, cut lines only, 736.6 × 442 mm (29 × 17.4 in). Fins, gills and the side stripes are cut as narrow slots so light shows through them.

Author
DXF World · 415 files
Formats
SVG, DXF
Size
737 × 442 mm (29.00 × 17.40 in)
Material
Plywood, MDF, acrylic or metal (scale to your piece)
Cut length
14.60 m
Est. time, 10 W diode (3 mm)
48 min 40 s
Est. time, 40 W CO2 (3 mm)
20 min 17 s
Layers
CUT only, no engraving

Free account required to download

How to make it

  1. 01Check that your machine takes 736.6 mm, or scale the panel down and test-cut the narrowest fin slot.
  2. 02Cut the fish details first, then the frame opening, then the two curved caps.
  3. 03Build the depth with spacer strips between the caps and stick an LED strip to the back.
  4. 04Fix the framed panel to the caps, sand the edges and seal it with clear oil or lacquer.

The front panel and caps

The main piece is a rounded rectangle frame with the salmon floating inside it, held only at the mouth and the tail. Its fins, gill plate, eye and side stripes are thin slots, so the fish looks hand-drawn when light passes behind it. The two caps have one straight edge and one gentle arc and close the top and bottom of the panel, as the photo shows in birch plywood. The file has no back or side panels; you build the depth to suit your light, with strips of the same material between the caps.

Lighting it

A warm white LED strip or a few LED puck lights behind the fish give an even glow and stay cool against wood. Leave a few centimetres between the panel and the wall so the light spreads, and paint the inside white to bounce it. Use a plug-in strip with an inline switch, or battery lights for a cabin wall with no outlet.

Cutting tips

At 736.6 mm the panel needs a large laser bed or a CNC router; a router needs a small bit for the slots, so test one fin first. The fish hangs on two short links, so cut all the fish details before the frame opening and keep the sheet weighted flat. The narrow slots get weak when the design is scaled down a lot, so test the narrowest fin slot before cutting a reduced copy.

Questions about this file

Does the file include the sides and back?

No. It has the front panel and the two curved caps. Add spacer strips and a back board cut to your own depth.

What light should I use?

A warm white LED strip or LED puck lights. They run cool, which matters behind thin wood.

Can I hang it without a light?

Yes, the framed salmon works as plain wall art for a cabin or a fishing room.

Will it fit on a small laser?

Not at full size. Scale it down, or cut it on a larger machine or a CNC router.

Which material suits it?

Birch plywood or MDF. Paint MDF, or oil the plywood for a lodge look like the photo.

Similar files