VisualizationHorse Head SVG, Flowing Mane Horse Silhouette DXF, Equestrian Line Art Laser Cut File, Horse Car Decal
A horse head in profile with a long, flowing mane that ends in a decorative swirl under the neck, drawn as an open line-art silhouette. This free download contains an SVG and a DXF with cut lines only, 138.2 × 139 mm (5.44 × 5.47 in), made to be scaled. Most of the design is one piece, and three small mane strands cut out as separate bits.
- Formats
- SVG, DXF
- Size
- 138 × 139 mm (5.44 × 5.47 in)
- Material
- Plywood, MDF, acrylic or metal (scale to your piece)
- Cut length
- 2.93 m
- Est. time, 10 W diode (3 mm)
- 9 min 46 s
- Est. time, 40 W CO2 (3 mm)
- 4 min 04 s
- Layers
- CUT only, no engraving
Free account required to download
How to make it
- 01Scale the horse to at least 450 mm for wood, or keep it small for vinyl.
- 02Cut the eye and inner details first, then the outer outline of the head and mane.
- 03Weed vinyl carefully around the swirl, or sand the wooden edges and paint them.
- 04Glue the three loose mane strands in place, then hang the head with small screws or mounting pads.
Scaling and material
At the file size of 138.2 mm the strands and the eye detail are very fine, which suits vinyl but not wood. For a wall piece in plywood or MDF, scale it to 450 mm or more so every strand ends up a few millimetres wide. The black version in the photo shows how it reads at that size: the head, the arched neck line and the mane fill a good part of the wall. Steel works too on a plasma or fibre cutter once the piece is large. Thin bridges near the nostril and eye get weak if you scale the horse down.
The loose mane strands
Three short strands inside the mane are not tied to the main outline. On vinyl they simply stay where they land on the transfer tape. In wood, paint them with the rest and glue them in place while the main piece lies flat, or mount the whole horse on a backing panel so they cannot get lost.
Gift and selling ideas
Riders, stables and farm shops buy horse heads like this for barn doors, tack rooms and lockers. Cut it small in outdoor vinyl as a car or trailer window sticker, or large in rusted steel for a gate. A pair facing each other makes a good frame around a stable name board, and a single head on a round plaque is an easy gift for a riding instructor.
Questions about this file
Can I cut it as a car decal?
Yes, cut it from outdoor vinyl on a vinyl cutter and apply it with transfer tape. Do not laser PVC vinyl, as it gives off harmful fumes.
How big should a wooden version be?
About 450 mm wide or more, so the thin strands survive cutting and handling.
Are there loose pieces?
Three small strands in the mane cut out on their own. Glue them back or mount the horse on a backing board.
Which way does the horse face?
To the left. Mirror the file in your software if you want a right-facing pair.
Will a steel version hold up outdoors?
Yes, at a large size cut on a plasma or fibre cutter and finished with black powder coat, like the photo.
Similar files



