VisualizationCross Cutout Ornament SVG, Round Christian Ornament Laser Cut File, Baptism Gift Tag DXF, Easter Cross Disc
A one-piece round ornament with a plain Latin cross cut out of the center and a small tab with a hole at the top for a ribbon or hook. The free download is one SVG and one DXF file, 96.5 × 101.6 mm (3.80 × 4.00 in), cut lines only: three contours, the disc, the cross opening and the hanging hole.
- Formats
- SVG, DXF
- Size
- 97 × 102 mm (3.80 × 4.00 in)
- Material
- Plywood, MDF, acrylic or metal (scale to your piece)
- Cut length
- 0.52 m
- Est. time, 10 W diode (3 mm)
- 1 min 45 s
- Est. time, 40 W CO2 (3 mm)
- 44 s
- Layers
- CUT only, no engraving
Free account required to download
How to make it
- 01Scale the file if you want a larger disc, keeping the hanging hole at least 3 mm across so a ribbon still fits.
- 02Cut one copy in your chosen sheet and check that the cross corners are clean before running a batch.
- 03Add any engraving (name, date, short verse) under or around the cross on the same job.
- 04Sand or paint the faces, then thread a ribbon, twine or metal hook through the top hole.
A simple file with many uses
This is about as plain as a cut file gets: a disc just under 10 cm across, a rounded tab on top with a small hole, and a tall cross with soft rounded ends cut right through the middle. That plainness is the point. The open cross lets light or a wall color show through, and the big flat area around it leaves room for a name, a date or a short verse if you add engraving of your own. The photo shows it in white painted MDF on a light wall, where the shadow of the cross does most of the work.
Material and edge quality
Any 3 mm sheet cuts it in one pass on most lasers: birch plywood, MDF for painting, or acrylic in white, gold mirror or clear. The circle in the file is drawn from short straight segments, which shows as faint facets on a very large copy. For ornaments at this size you will not notice it; if you scale it up to a 30 cm wall disc, redraw the circle in your software first.
Gift ideas
- Baptism, christening or first communion favors, with the child's name and date engraved under the cross.
- Easter tree ornaments in pastel acrylic.
- Sympathy or memorial keepsakes tied to a card.
- Christmas tree ornaments for a church bazaar, cut in batches from one sheet.
Eight of them fit side by side on a 400 × 300 mm sheet, so it is a quick batch item for craft fair tables.
Questions about this file
Is there any engraving in the file?
No, only cut lines: the round outline with its tab, the cross opening and the hanging hole. Text or dates are something you add yourself.
What is the best material for christening favors?
White acrylic or painted MDF looks clean and even; birch plywood with a dark engraved name gives a rustic look.
Can I make it a wall disc instead of an ornament?
Yes. Scale it to 25–40 cm, redraw the circle for a smooth edge and use 6 mm plywood or MDF so it stays flat.
Will a small diode laser cut it?
Yes. It is a short, simple cut; 3 mm plywood takes one or two passes on a 10 W diode.
Can I layer it?
Glue it onto a slightly larger disc in a contrast color so the cross shows a different shade instead of the wall.
Similar files



