VisualizationAllah Muhammad Wall Art SVG, Arabic Calligraphy Laser Cut File, Islamic Name Set DXF, Muslim Wall Decor With Circles
The names Allah and Muhammad in flowing Arabic calligraphy, each surrounded by a ring of round dots that grow from small to large, meant to be mounted directly on the wall as separate pieces. The free SVG and DXF are drawn tiny, 53.7 × 24.2 mm (2.11 × 0.95 in), and must be scaled up for wall decor. The main letter shapes, the small marks above them and every dot are separate pieces.
- Formats
- SVG, DXF
- Size
- 54 × 24 mm (2.11 × 0.95 in)
- Material
- Plywood, MDF, acrylic or metal (scale to your piece)
- Cut length
- 0.50 m
- Est. time, 10 W diode (3 mm)
- 1 min 39 s
- Est. time, 40 W CO2 (3 mm)
- 41 s
- Layers
- CUT only, no engraving
Free account required to download
How to make it
- 01Scale the set to your wall, roughly 60 cm to 1.5 m across, and check the letter tips stay strong.
- 02Cut all pieces, keeping the small marks of each name grouped as they come off the bed.
- 03Sand or peel the protective film and finish wood pieces with oil or lacquer.
- 04Mark each position through the printed guide with a pencil, remove the paper and fix the pieces with mounting tape or spacers.
The pieces
On the left, Muhammad sits inside a loose ring of dots; on the right, Allah is surrounded the same way, and a short trail of dots links the two groups. The main body of each name is one piece, and the short strokes and small marks above and below the letters cut as their own small parts, so keep them together and lay them out from the file when you mount them. The dots come in several sizes, larger at the outer edge of each ring.
Scaling
At 53.7 mm wide the file is far too small to cut as drawn; it is a starting point. Scale it so the whole set spans 1 to 1.5 m for a living room wall, or around 60 cm for a smaller space, and check the thin tips of the letters, which become fragile below that. 3 mm or 6 mm plywood, MDF or gold mirror acrylic all suit it.
Mounting and finish
A full-size paper print of the layout, taped up where the set will hang, shows exactly where each piece goes; fix them with double-sided mounting tape or small spacers so they float and cast a shadow, as in the photo. Oak or walnut veneer gives a warm look; gold or black acrylic is popular for Ramadan and Eid decor and as a housewarming gift.
Questions about this file
Why is the drawing only 5 cm wide?
It is drawn at only 53.7 × 24.2 mm as a master to enlarge. Resize it evenly to the wall area you want.
Which names are in the design?
Allah on the right and Muhammad on the left, each in a ring of round dots.
How do I place the pieces correctly?
Print the layout at full size, hang the paper where the set will go and mount each piece on its outline.
Does acrylic suit it?
Yes, gold mirror acrylic looks rich and catches the light; 3 mm is enough for wall mounting.
Can I make just one name?
Yes, delete the other group and its dots and use one name as a single panel or door piece.
Similar files



