VisualizationJohn 3:16 Crucifix SVG, Jesus on the Cross Wall Plaque DXF, Bible Verse Oval Sign Laser Cut File, Christian Wall Art
A rectangular plaque with notched corners, an oval opening in the middle with Christ on the cross standing inside it, and the words of John 3:16, For God so loved the world, that he gave his only begotten Son, cut in a ring around the oval. Get it free as SVG and DXF files at 406.4 × 609.6 mm (16 × 24 in). The cross touches the oval at the top and bottom, so the whole plaque cuts as one piece.
- Formats
- SVG, DXF
- Size
- 406 × 610 mm (16.00 × 24.00 in)
- Material
- Plywood, MDF, acrylic or metal (scale to your piece)
- Cut length
- 14.26 m
- Est. time, 10 W diode (3 mm)
- 47 min 31 s
- Est. time, 40 W CO2 (3 mm)
- 19 min 48 s
- Layers
- CUT only, no engraving
Free account required to download
How to make it
- 01Move the inner detail lines of the figure and cross to a score or engrave layer.
- 02Test the stencil letters on scrap, then cut the verse, the oval and the outer edge in that order.
- 03Sand the edges lightly and finish with oil, stain or clear lacquer.
- 04Glue a darker board behind the oval for contrast, then fit a sawtooth hanger.
The design
The board has rounded notches at all four corners. Inside, a tall oval is cut away, leaving the cross and the figure of Christ joined to the plaque at the top of the upright and at its foot. The verse runs around the oval in capital letters; the letter O and other closed letters are drawn in a stencil style, split by small gaps, so their centres stay in the board instead of falling out. Fine single lines on the figure and the cross show wood grain, ribs, the crown of thorns and the folds of the cloth.
Cutting tips
Put the fine detail lines on a separate layer and run them as a light score or engrave pass; at full cut power they become thin slits that weaken the arms and the face. Cut the letters next, then the oval, and the outer edge last. At 16 × 24 in this needs a large laser or a CNC router; when scaling the file down for a smaller bed, watch the hands and feet, which are the narrowest points.
Finishing and gift ideas
Oak or birch plywood with a clear oil keeps the warm look of the photo. A darker backing board behind the oval makes the figure and the verse stand out. It makes a fitting gift for a confirmation, a first communion, Easter or a new home, and churches use plaques like this above a doorway or in a prayer corner.
Questions about this file
Which Bible verse is on it?
John 3:16, cut around the oval: For God so loved the world, that he gave his only begotten Son.
Why are the O letters split?
They are stencil letters with small bridges, so the centres stay attached and the words read cleanly.
Should I cut the lines on the body?
Score or engrave them instead. Cut through, they leave slits in the thin arms and the face.
Can I change the verse?
Yes, delete the letters and set your own text around the oval in a stencil font with bridges.
What size is it?
406.4 × 609.6 mm, which is 16 × 24 in. Scale it evenly to fit your board.
Similar files



