DXF / SVG / GeneratorsFiles. Tools. Possibilities.
EN
Saved0
Two black metal horseshoes with nail holes standing on a wooden table, one heels up and one heels down, in a sunny roomVisualization
DW-300040 · UPDATED 11/21/2026

Horseshoe SVG, Lucky Horseshoe Laser Cut File, Rustic Horseshoe Sign Blank DXF, Western Wall Decor

Two flat horseshoe shapes in one file: a rounded shoe with squared heels and a wider, taller shoe with pointed heels, each pierced by seven nail-hole slots. Both shoes come in one free SVG and one free DXF, cut lines only, on a 424.2 × 215.9 mm (16.70 × 8.50 in) layout, ready to scale for signs, hooks and table decor.

Author
DXF World · 530 files
Formats
SVG, DXF
Size
424 × 216 mm (16.70 × 8.50 in)
Material
Plywood, MDF, acrylic or metal (scale to your piece)
Cut length
2.47 m
Est. time, 10 W diode (3 mm)
8 min 14 s
Est. time, 40 W CO2 (3 mm)
3 min 26 s
Layers
CUT only, no engraving

Free account required to download

How to make it

  1. 01Pick the shoe you want or keep both and scale them to the final width.
  2. 02Cut the seven nail holes in each shoe first, then the outer outline.
  3. 03Sand or grind the edges smooth and clean off any soot or dross.
  4. 04Paint, stain or engrave a name, then hang it heels up or fit hooks.

Two shoe shapes

The left shoe is the classic lucky U, slightly narrower at the top, with small squared heels and seven oval nail holes around the curve. The right shoe is broader and arched like a gate, with pointed heels that flare outward and the same row of seven nail holes. Both are single outlines with no thin bridges, so they cut cleanly in almost any material. The photo shows them in black steel, one standing heels up and one heels down on a farmhouse table.

Sizes and materials

As drawn, each shoe is about 170 to 190 mm wide, close to a real horseshoe. Shrink them to 40 mm for earrings, keychains or wedding favours in acrylic, or enlarge them to half a metre as a blank for a ranch sign with a name painted across. Steel on a plasma table gives the most authentic look; 6 mm plywood with a dark stain works for indoor decor.

Ideas for using them

Hang one heels up over a door for luck, or screw coat hooks into the nail holes for a western entryway rack. A pair painted gold makes a wedding sign or table number holder at a country venue. Engrave a horse's name and a date on the shoe for a stable gift, or cut a set as party decor for a rodeo or a Saint Patrick's Day table.

Questions about this file

Which way should a lucky horseshoe hang?

Heels up is the usual way, so the luck stays in. The file gives you one shoe drawn each way up.

Can I use the nail holes for screws?

Yes. They fit small screws for wall mounting or for fixing hooks if you keep the drawn size.

How small can I make them?

Down to about 30 to 40 mm in acrylic for jewellery or favours. Very small holes may need enlarging.

What thickness is best for a wall piece?

3 to 4 mm steel or 6 mm plywood feels solid. Thin acrylic is better for small decorations.

Can I add a name across the shoe?

Yes. Add an engraving or a cut-out text layer in your laser software across the wide curve.

Similar files