VisualizationBarking Dog Silhouette SVG, Playful Shepherd Dog Laser Cut File, Dog Lover Wall Art DXF, Yard Dog Cutout
A solid silhouette of a shepherd-type dog in a play bow: front legs stretched low, hindquarters up, a big bushy tail curled high and the muzzle open in a bark. The free download is one SVG and one DXF file, 203.2 × 198.1 mm (8.00 × 7.80 in), cut lines only: the outline plus a few fine detail slits for the eye, ear, shoulder and hip.
- Formats
- SVG, DXF
- Size
- 203 × 198 mm (8.00 × 7.80 in)
- Material
- Plywood, MDF, acrylic or metal (scale to your piece)
- Cut length
- 1.25 m
- Est. time, 10 W diode (3 mm)
- 4 min 11 s
- Est. time, 40 W CO2 (3 mm)
- 1 min 44 s
- Layers
- CUT only, no engraving
Free account required to download
How to make it
- 01Scale the dog to its use, from a 20 cm shelf piece to a life-size yard cut-out.
- 02Delete the small fur slits if you go below about 100 mm, then cut one test piece.
- 03Cut the silhouette from plywood, MDF, acrylic or steel, and cut small support feet if it will stand on the floor.
- 04Sand or deburr, paint black or in coat colors, seal outdoor pieces, and glue on feet, stakes or a hanger.
The pose
This is the classic "let's play" stance: chest close to the ground, rear end up, tail waving above the back, head lifted and barking. The outline has ragged fur along the chest, belly and tail, and five small cut-outs give it life: the eye, a curved line inside the ear, two fur lines on the shoulder and hip, and a short slit behind the front leg. Apart from those, it is one solid shape, so it reads instantly even across a garden. The photo shows a large matte black version standing on the floor next to a window.
Size and material
The file is drawn at 20 cm, which suits a shelf piece, a fridge magnet base or a sign topper in 3 mm plywood or acrylic. Because there are no thin bridges, it also scales up well:
- 500–700 mm: an indoor floor cut-out like in the photo, 6 mm MDF painted black, with a small foot glued behind each paw.
- 800 mm and up: a yard silhouette in 2 mm steel on a plasma table or 12 mm exterior board on a CNC router.
When scaling down below 100 mm, delete the fur slits, since they become too thin to cut.
Ideas
- A "dog on duty" yard sign by the gate.
- A pet memorial silhouette with the dog's name engraved on the body.
- Dog-themed decor for a groomer, kennel or dog-walking business.
- A playful shelf sitter for dog lovers, painted in the dog's real coat colors.
Questions about this file
What breed is it?
It is a shepherd-type dog with upright ears and a thick, curled tail; it also passes for a husky or spitz mix.
Can it stand in the garden?
Yes, cut in steel or exterior board. Weld or screw two flat stakes behind the legs and push them into the ground.
Can I add my dog's name?
Engrave it across the body, or cut the name out of the flank as a stencil if the silhouette is 400 mm or larger.
Will it work as a pet memorial?
It does. Many people use it in dark wood with the name and dates engraved, or as a garden marker in steel.
How do I make it stand on a floor?
Glue a small triangular foot behind each paw, or slot the bottom of the legs into a long wooden base.
Similar files



