VisualizationDollar Sign SVG, Money Sign Wall Decor DXF, Dollar Ring Medallion Cut File, Money Pendant Laser File
A dollar sign set inside a round ring, with a hanging loop on top, cut as one solid piece. The free SVG and DXF contain cut lines only and are drawn at 1008.1 × 1053.4 mm (39.69 × 41.47 in), easy to scale to any size. The S and its two bars join the ring at top and bottom, so it hangs from the loop with no loose parts.
- Formats
- SVG, DXF
- Size
- 1,008 × 1,053 mm (39.69 × 41.47 in)
- Material
- Plywood, MDF, acrylic or metal (scale to your piece)
- Cut length
- 11.33 m
- Est. time, 10 W diode (3 mm)
- 37 min 46 s
- Est. time, 40 W CO2 (3 mm)
- 15 min 44 s
- Layers
- CUT only, no engraving
Free account required to download
How to make it
- 01Pick a size: full size for a big sign, 300–600 mm for a wall, 40–60 mm for a pendant.
- 02Cut the windows inside the S first, then the ring outline and the hanging loop.
- 03Sand the edges and spray the piece gold, silver or black.
- 04Hang it on a nail through the loop, or thread a jump ring and chain for a pendant.
One piece, many sizes
The design is a single part: a ring, a heavy S, and two vertical bars that run through the S and meet the ring above and below. Narrow windows between the bars keep the symbol open and light. At the file size of about a metre it makes a bold sign for a shop, a home office or a game room. The photo shows it in brushed metal, leaning on a shelf.
Scaling and material
For a wall sign, 300–600 mm in plywood, MDF or acrylic is easy to handle on a hobby laser. Large versions in steel suit a plasma table. Scale it down to 40–60 mm and it becomes a pendant, keychain or bag charm; use 3 mm acrylic or plywood there, because the outer ring gets narrow and thin bridges weaken when you shrink it a lot. Check that the hole in the loop still takes your jump ring or cord.
Finishing and gift ideas
Gold or silver spray paint suits the symbol best, and mirror acrylic gives a flashy pendant without paint. Ideas: a sign above a savings jar, a desk piece for a new accountant or bank worker, keychains as a small business giveaway, or a set of money symbols for a poker room wall.
Questions about this file
How big is the file?
1008.1 × 1053.4 mm including the hanging loop. Scale it to whatever size you need.
Can I make a necklace from it?
Yes. Scale it to about 40–60 mm and cut 3 mm acrylic or plywood; mirror acrylic looks like metal.
Are there loose pieces?
No, it cuts as one part with the S joined to the ring.
Can it be cut in steel?
Yes, at sign size on a plasma or fibre cutter.
How do I hang it?
Use the loop on top with a nail or hook. For a flush look, add keyhole hangers on the back.
Similar files



