DXF / SVG / GeneratorsFiles. Tools. Possibilities.
EN
Saved0
Matte black Lady Justice wall clock with laurel leaves, white numerals and white hands hanging on a cream wall next to a bookshelfVisualization
DW-300084 · UPDATED 11/21/2026

Lady Justice Clock SVG, Scales of Justice Wall Clock DXF, Lawyer Office Clock Laser Cut File, Law Graduate Gift

A wall clock built around a blindfolded Lady Justice holding her scales high, standing in front of a round face edged with laurel leaves, with the numerals 1 to 12 cut through the face and a centre hole for the movement. The free SVG and DXF hold one piece of cut lines at 426 × 418 mm (16.77 × 16.46 in).

Author
DXF World · 530 files
Formats
SVG, DXF
Size
426 × 418 mm (16.77 × 16.46 in)
Material
Plywood, MDF, acrylic or metal (scale to your piece)
Cut length
10.41 m
Est. time, 10 W diode (3 mm)
34 min 42 s
Est. time, 40 W CO2 (3 mm)
14 min 28 s
Layers
CUT only, no engraving

Free account required to download

How to make it

  1. 01Keep the clock near its file size and set the laser for fine detail in the robe and the scales.
  2. 02Cut the numerals, robe slots and centre hole first, and the outline of the clock last.
  3. 03Sand gently around the figure, then paint or seal the clock and glue a backing panel behind the numerals if you want them coloured.
  4. 04Fit a quartz movement through the centre hole, add the hands and hang the clock.

The design

The clock face is a large disc with a laurel border running up its left side and a row of leaves on the right. Lady Justice stands over the right half in a long draped robe, wearing a blindfold and a spiked crown, her arm stretched out to hold the scales above the rim. Her figure is detailed with narrow cut-outs that show the folds of the robe, and a cut channel around her outline separates her from the face, held by small bridges. The twelve numerals are cut through the disc, so a wall or a backing board shows through; the photo shows a matte black clock with white numerals and hands.

Cutting and clock parts

At 426 mm the robe slots and the scale chains are fine but cut well in 3 to 4 mm plywood or acrylic with a well-focused beam. Do not scale it down much, or the folds will lose their bridges. The centre hole takes a standard quartz movement; choose one whose shaft suits your material thickness, and hands about 100 to 130 mm long so they clear the figure.

Gift ideas

This is a classic present for a lawyer, a judge, a notary or a law student at graduation. Engrave a name and the year of admission to the bar on the plain lower part of the face. Gold acrylic behind the numerals looks smart in an office, and natural walnut-stained plywood suits a traditional study.

Questions about this file

What clock movement fits?

A standard quartz movement through the centre hole. Pick a shaft length that suits your material plus any backing board.

Which hands should I use?

Hands about 100 to 130 mm long, so the minute hand reaches the numerals without hitting the figure's scales.

Can I make the numerals a different colour?

Yes. Glue white, gold or mirror acrylic behind the face so it shows through the cut-out numbers.

Can I add a name?

Engrave a name, a firm name or a graduation year on the plain lower part of the disc before cutting.

Is it one piece?

Yes. The figure is joined to the face by small bridges, so the clock cuts as a single piece.

Similar files