VisualizationConnecticut Map Clock SVG, State Shaped Wall Clock Laser Cut File, Charter Oak Tree Sign DXF, Connecticut Gift
A wall clock face cut in the outline of the state of Connecticut, with twelve 24.3 mm round openings as hour markers, an 8.1 mm center hole for a quartz clock movement, one more 24.3 mm opening inside the ring and a detailed Charter Oak tree with its name above the center. The free download is one SVG and one DXF file, 403.9 × 289.6 mm (15.90 × 11.40 in), cut lines only.
- Formats
- SVG, DXF
- Size
- 404 × 290 mm (15.90 × 11.40 in)
- Material
- Plywood, MDF, acrylic or metal (scale to your piece)
- Cut length
- 5.38 m
- Est. time, 10 W diode (3 mm)
- 17 min 56 s
- Est. time, 40 W CO2 (3 mm)
- 7 min 28 s
- Layers
- CUT only, no engraving
Free account required to download
How to make it
- 01Open the file, join the state outline into one closed shape and decide whether the tree is cut or engraved.
- 02Cut a test of one 24.3 mm hole and check that a quarter or your marker disc fits before cutting the board.
- 03Cut the clock face and a plain back from the same outline, then glue coins or discs into the hour openings.
- 04Glue the back on, fit the quartz movement and hands through the 8.1 mm center hole, and add a wall hanger.
What is in the file
The board is the full state outline, with the straight northern border, the notch at the top and the ragged shoreline along Long Island Sound. Inside it twelve round openings, each 24.3 mm across, form the hour ring around an 8.1 mm center hole. A thirteenth opening of the same size sits inside the ring below and right of center. Above the center hole is the Charter Oak, a spreading tree on a strip of ground with a tiny label. 24.3 mm is the diameter of a US quarter, so the openings can hold coins; the Charter Oak is also the picture on Connecticut's state quarter, which makes this a natural coin collection clock.
Cutting tips
- The state outline is drawn as a chain of short lines. If your software reports an open shape, join the curves before cutting.
- The tree has dozens of tiny branch openings and the label letters are only a few millimetres tall. Cut it at 1:1 only on a fine laser, or switch the tree to engraving and keep the clean holes as cuts.
- Scaling changes the hole sizes. Keep the file at 100% if you want quarters to sit in the openings.
The two feet in the photo are not part of the file; for a wall clock you only need a hanger.
Building the clock
Cut a second outline from thin plywood or card as a back, glue coins or colored discs into the openings, and fit a quartz movement through the center hole, with a shaft long enough for the face plus the back. Birch plywood in 4–6 mm suits the size. As a gift it suits Connecticut natives who moved away, coin collectors and new homeowners in the state.
Questions about this file
What clock movement do I need?
A standard quartz movement with a threaded shaft for an 8 mm hole. Pick a shaft length that suits your board plus the back panel.
Do US quarters fit the holes?
The openings are 24.3 mm, the diameter of a quarter. Cut a test hole first, since kerf can make it slightly larger or smaller.
What is the extra hole inside the ring for?
It is a thirteenth coin-size opening. Many people use it for a featured coin, such as the Connecticut state quarter, or a date disc.
Can I make it without coins?
Yes. Leave the openings empty over a colored back, or glue in wooden or acrylic discs cut to 24.3 mm.
Can I scale it up?
The outline and tree scale freely, but the hour holes grow with it and will no longer fit coins. The center hole must stay 8 mm for the movement.
Similar files



