VisualizationFloral Wall Clock SVG, Acanthus Scroll Clock Face DXF, Round Wooden Clock Laser Cut File, Vintage Leaf Clock Template
A round wall clock whose open centre is filled with four curving stems that spiral out from a central hub like a pinwheel, each carrying curled acanthus leaves. The free SVG and DXF hold one piece of cut lines at 306 × 306 mm (12.05 × 12.05 in), with numerals 1 to 12 and a ring of small minute holes cut through the rim and a hole in the hub for the movement.
- Formats
- SVG, DXF
- Size
- 306 × 306 mm (12.05 × 12.05 in)
- Material
- Plywood, MDF, acrylic or metal (scale to your piece)
- Cut length
- 9.70 m
- Est. time, 10 W diode (3 mm)
- 32 min 21 s
- Est. time, 40 W CO2 (3 mm)
- 13 min 29 s
- Layers
- CUT only, no engraving
Free account required to download
How to make it
- 01Keep the clock at 306 mm or larger and set the laser for fine detail in the leaf tips.
- 02Cut the minute holes, numerals and hub hole first, then the leaves and the outer edge.
- 03Sand lightly, then lacquer, oil or paint the face and add a backing board if you want a second colour.
- 04Push a quartz movement through the hub hole, fit the hands and hang the clock.
Face and rim
The outer rim is a wide band carrying the hour numerals, cut through as stencil-style digits, with small bridges in the closed loops so no centres drop out. Between the numerals, small round holes mark the minutes. Inside the rim the face is open: four slender stems leave the round hub, sweep outward in S-curves and meet the rim at 12, 3, 6 and 9, and each stem sprouts curling acanthus leaves that fill the quarters. The result is light and lacy, and the wall colour shows through every gap.
Cutting tips
The leaves have many small points and inner curls, so cut this clock at its file size or larger. 3 mm birch plywood suits a 12-inch clock; at 450 mm and up, 4 to 6 mm plywood or MDF gives a sturdier face. Cut the minute holes and numerals first, then the leaves, the outer edge last, and use air assist to keep the fine leaf tips from charring.
Finishing and gift ideas
Leave the birch natural with a clear matte lacquer, as in the photo, or paint the clock white for a shabby-chic kitchen. Mount it on a painted round backing board so the leaves stand out in a second colour. It makes a thoughtful housewarming or Mother's Day gift, and a set of matching clocks in different woods sells well at craft fairs.
Questions about this file
Does it have a hole for the clock movement?
Yes, the central hub has a round hole for the shaft. Measure it against your quartz movement and enlarge it in your software if needed.
Why do some numbers look like stencil digits?
The closed loops of the digits have small bridges, so their inner parts stay attached instead of falling out.
What hand length suits it?
For the 306 mm size, a minute hand of about 120 mm reaches the minute holes without passing the rim.
Will the leaf clock work in acrylic?
Yes. Mirror gold or white acrylic makes a modern version; slow down a little on the fine leaf tips.
How do I add a backing colour?
Cut a plain circle the same size from another material, paint it, and glue it behind the face with small spacers.
Similar files



