DXF / SVG / GeneratorsFiles. Tools. Possibilities.
EN
Saved0
Large black baseball batter silhouette with bat raised, leaning against a cream wall next to a bookshelfVisualization
DW-300019 · UPDATED 11/20/2026

Baseball Player SVG, Batter Silhouette Laser Cut File, Baseball Wall Art DXF, Sports Room Decor

A solid silhouette of a baseball batter waiting for the pitch, wearing a helmet, bat held high over the back shoulder and feet set wide. The free download is one SVG and one DXF file at 368.5 × 647.6 mm (14.51 × 25.5 in), cut lines only, made of one closed outline with no inner holes, so it is easy to cut at any size.

Author
DXF World · 415 files
Formats
SVG, DXF
Size
369 × 648 mm (14.51 × 25.50 in)
Material
Plywood, MDF, acrylic or metal (scale to your piece)
Cut length
2.51 m
Est. time, 10 W diode (3 mm)
8 min 21 s
Est. time, 40 W CO2 (3 mm)
3 min 29 s
Layers
CUT only, no engraving

Free account required to download

How to make it

  1. 01Set the height you want; at small sizes check that the bat stays at least 4 mm wide.
  2. 02Place the outline on your sheet, diagonally if the bed is short, and cut it in one pass.
  3. 03Sand the edges, especially around the hands and the bat tip.
  4. 04Paint it, add a name or number if you like, and hang it or stand it on a base.

A single clean outline

The whole design is one closed contour: helmet with brim, both hands on the bat, bent knees and cleats. There are no inner cut-outs, which makes it about the simplest file you can run, and the shape still reads clearly from across a room. The bat is the thinnest part, so it sets the limit when you shrink it.

Scaling and material

As drawn it is 647.6 mm tall, a good size for a boy's bedroom wall. Leaned against the wall like the one in the photo it works best around 1 to 1.2 m tall, cut from 12 mm MDF or plywood on a CNC router, or from steel on a plasma table. Smaller versions work well too: at 200 mm tall in 3 mm plywood the bat is still several millimetres wide, fine for cake toppers, shelf figures or team trophy plates. On a laser bed that is too short for the full size, rotate the file diagonally or scale it to fit.

Ideas for teams and gifts

Add a name and number in your design software and cut or engrave them below the feet. Cut a set for a team banquet, a coach gift or a dugout sign. A row of these in team colours above a bed or along a hallway makes a simple sports-themed wall. Paired with a pitcher or catcher silhouette, it also suits a game-room door or a local ballpark concession stand.

Questions about this file

Does the silhouette have any inner holes?

No, it is one closed outline. Nothing falls out, and it cuts very fast.

Can I add a player's name and number?

Yes. Add text in your design software and engrave it on the body or cut it as a separate plaque under the feet.

What size works as a cake topper?

Around 120 to 150 mm tall in 3 mm acrylic or plywood, with a stick glued to the back of one leg.

Can I flip the batter to face the other way?

Yes, mirror the file horizontally before cutting. Handy when you hang two players facing each other.

What finish suits a kid's room?

Matte black is classic. Team colours or a wood stain with a clear coat also work.

Similar files