DXF / SVG / GeneratorsFiles. Tools. Possibilities.
EN
Saved0
Large grey felt mouse with a teardrop eye and a long curling tail lying on a cream rug in a sunny living roomVisualization
DW-300081 · UPDATED 11/21/2026

Mouse Silhouette SVG, Cat Toy Mouse Template DXF, Felt Cat Mat Cut File, Cardboard Cat Scratcher Pattern

A large side-view mouse shape with a round body, a pointed nose, a teardrop eye hole, a narrow slot at the nose and a long curling tail. The free SVG and DXF hold cut lines only at 584.2 × 248.9 mm (23 × 9.8 in), a size that suits a felt play mat for a cat or a stacked cardboard scratcher.

Author
DXF World · 530 files
Formats
SVG, DXF
Size
584 × 249 mm (23.00 × 9.80 in)
Material
Plywood, MDF, acrylic or metal (scale to your piece)
Cut length
1.76 m
Est. time, 10 W diode (3 mm)
5 min 51 s
Est. time, 40 W CO2 (3 mm)
2 min 26 s
Layers
CUT only, no engraving

Free account required to download

How to make it

  1. 01Scale the mouse to your bed or project and check the tail width near the tip.
  2. 02Run a test on a felt or cardboard offcut to set power and speed without scorching.
  3. 03Cut one layer for a mat or sign, or twenty or more layers for a scratcher block.
  4. 04Glue the layers for a scratcher, or thread a cord with a pompom through the nose slot of a felt mat.

Three ways to make it

The file is a single outline, so it adapts to many materials. Cut it from thick wool or polyester felt for a soft mat a cat can lie on, as in the photo; felt cuts cleanly on a CO2 laser at low power. For a scratcher, cut twenty to forty copies from corrugated cardboard, glue them face to face into a thick block and sand the top: the cardboard edges become the scratching surface. A plywood version, painted grey, works as a playful wall sign over a pet bed or a feeding corner.

The eye and the nose slot

The eye is a teardrop hole. The narrow slot near the nose is a handy spot to thread a short cord with a pompom or a feather, which turns a flat mat into a toy the cat can bat. On a cardboard scratcher the slots line up through all layers, so a cord can run through the whole block and hang a toy from the nose.

Size and cutting

The shape is 584.2 mm long, longer than most hobby laser beds. Scale it down to your bed for a smaller cat mat or coasters, or split a cardboard stack into two halves. The tail is the thinnest part, around its tip especially, so keep it at least 8 mm wide in cardboard and felt or it will tear when the cat pulls on it.

Questions about this file

Is laser-cut felt safe for cats?

Use natural wool felt or plain polyester felt, and air the cut pieces out before giving them to your pet. Remove loose fibres from the edges.

How many cardboard layers make a scratcher?

Twenty to forty layers of 3 to 5 mm corrugated cardboard make a block that stands well and gives the cat plenty of edge to scratch.

Can I make it smaller?

Yes. Halved, it makes a cute coaster or toy-box label; just keep the tail wide enough to survive.

Which glue works for a cardboard scratcher?

Plain white wood glue or a non-toxic craft glue. Let the block dry under weight overnight before your cat uses it.

Can I add a name?

Add the cat's name as engraving in your software before cutting; the large plain body has plenty of room for it.

Similar files