DXF / SVG / GeneratorsFiles. Tools. Possibilities.
EN
Saved0
Amber-stained fretwork basket with lattice circles, scrollwork sides and an arched handle with latch arms, on a wooden table in a sunny roomVisualization
DW-300032 · UPDATED 11/21/2026

Fretwork Basket Pattern, Wooden Basket With Handle Laser Cut File, Scroll Saw Bread Basket DXF, Lattice Gift Basket SVG

A decorative open basket in the old scroll saw style, with lattice-filled circles and leafy scrollwork in the sides, slim corner posts, a scalloped base and an arched handle held by two latch arms. The free files are an SVG and a DXF, cut lines only, on a 2352.7 × 446.5 mm (92.63 × 17.58 in) layout in which the parts are spread far apart.

Author
DXF World · 530 files
Formats
SVG, DXF
Size
2,353 × 447 mm (92.63 × 17.58 in)
Material
Plywood, MDF, acrylic or metal (scale to your piece)
Cut length
13.85 m
Est. time, 10 W diode (3 mm)
46 min 10 s
Est. time, 40 W CO2 (3 mm)
19 min 14 s
Layers
CUT only, no engraving

Free account required to download

How to make it

  1. 01Move the parts close together, join any half outlines if your software needs it, and nest them on your sheet.
  2. 02Cut the long side, end panel and corner posts twice, plus the base, rail, handle and both latch arms.
  3. 03Fit the sides and ends into the corner posts, set them on the scalloped base and glue the corners.
  4. 04Attach the handle with the latch arms and two buttons or pegs, then oil or stain the basket.

The parts

The layout shows one long side with two lattice circles and a central boss, one shorter end panel with a single lattice circle, two narrow corner posts with small scroll windows, a long rail with scrolled ends, a base board with a wavy scalloped edge, an arched handle with split feet and two latch arms with a round hole near the tip. The finished basket in the photo has two long sides and two ends, so cut the side, the end and the posts twice. In the photo the latch arms carry white buttons that pin the handle so it can fold down.

Cutting the fine fretwork

Most outlines are drawn as two mirrored halves that meet on a centre line. Lasers cut them as they are; if your software reports open shapes or you plan a CNC toolpath, join the halves first. The lattice openings are small, so run the inner cuts before the outlines and keep air assist on to limit scorching. On a diode laser, thin plywood of 3 to 4 mm gives the cleanest scrollwork. The parts sit far apart in the file, so drag them together before you nest.

Finishing and gift ideas

An amber oil or a cherry stain brings out the carved look shown in the photo. Glue the corners if the basket will carry weight. Use it for bread, fruit, Easter eggs or knitting, or fill it as a gift basket for a wedding or a housewarming.

Questions about this file

Why do I see only one long side in the file?

Each side shape is drawn once. Cut the long side, the end panel and the posts twice to get a closed basket.

What thickness should I use?

Measure the slots for the handle feet and posts in your software and choose a sheet that matches, or scale the file until it does. Test one joint first.

Can a 10 W diode laser cut all that fretwork?

Yes, in thin plywood. It takes a while because of the many small openings, so keep the bed clean and the air assist on.

Can I cut it on a scroll saw?

Yes. Print the parts at full size, glue the print to the board and drill a start hole in each opening.

Will it hold bread or fruit?

Yes, once the corners are glued. Use a food-safe oil and a cloth liner for bread.

Similar files