DXF / SVG / GeneratorsFiles. Tools. Possibilities.
EN
Saved0
Tall white jali room divider with rows of fan-shaped petal cut-outs standing on two feet in a bright living room beside a palmVisualization
DW-300006 · UPDATED 11/20/2026

Jali Panel DXF, Room Divider Laser Cut File, Decorative Screen Pattern SVG, Fan Petal Privacy Partition CNC

A full-height decorative screen panel cut through with staggered rows of fan motifs, each a half circle of teardrop petals over an almond-shaped center. The free download has one SVG and one DXF with 324 cut-outs inside a solid rectangle of 947.1 × 1923.9 mm (37.29 × 75.74 in), sized for a CNC router, a plasma table or a large-format laser.

Author
DXF World · 415 files
Formats
SVG, DXF
Size
947 × 1,924 mm (37.29 × 75.74 in)
Material
Plywood, MDF, acrylic or metal (scale to your piece)
Cut length
54.58 m
Est. time, 10 W diode (3 mm)
181 min 55 s
Est. time, 40 W CO2 (3 mm)
75 min 48 s
Layers
CUT only, no engraving

Free account required to download

How to make it

  1. 01Choose the machine: a router or plasma table at full size, or split the file into bands that fit your laser bed.
  2. 02Set the 324 inner cut-outs to run before the outer rectangle so the panel cannot shift.
  3. 03Clean up the petal tips and sand both faces, filling any chipped MDF edges.
  4. 04Prime and paint, then fit feet, hinges or a frame to stand or mount the panel.

The pattern

Each motif is a fan of teardrop petals spread over a pointed almond shape, a little like a stylised peacock tail. The fans sit in staggered rows, so every second row begins and ends with half a fan cut by the side borders. A plain solid border frames the whole panel. The photo shows it painted white and standing on two floor feet as a freestanding divider; those feet are not part of the file.

Cutting a panel this size

At almost two metres tall, the panel is meant for a CNC router in 12–18 mm MDF or plywood, or a plasma table in 1.5–3 mm steel for a balcony or garden screen. A laser with a 1300 × 2500 mm bed can cut it in thin MDF or acrylic. On a smaller laser, split the file into horizontal bands along the plain gaps between rows and join the bands on a frame. The petal tips are pointed and a router bit rounds them off; a 3 mm (1/8 in) bit keeps them close to the drawing. The pattern also works scaled down for a cabinet door insert, although the bridges between neighbouring petals get thin once it is shrunk a lot.

Uses

  • Freestanding room divider on feet, or three panels hinged into a folding screen.
  • Privacy screen on a balcony or patio in powder-coated steel.
  • Radiator cover front or a wardrobe door insert at a smaller scale.
  • Backlit wall feature with an LED strip mounted behind the panel.

Questions about this file

Can I cut this on a hobby laser?

Not in one piece. Split it into bands, or scale it down for a smaller screen or a cabinet insert.

What material holds up outdoors?

Powder-coated steel or aluminium, or exterior-grade plywood sealed on every edge. Indoor MDF swells in the rain.

Will the petal tips survive a CNC router?

They will be rounded by the bit radius. With a 3 mm bit they stay crisp enough to read as petals.

How do I make the panel stand?

Bolt two L-shaped feet to the bottom edge, as in the photo, or hinge three panels together so they stand as a folding screen.

Can I put a light behind it?

Yes. Mount LED strips on a back board 5–10 cm behind the panel and the cut-outs throw fan-shaped patterns onto the wall.

Similar files