DXF / SVG / GeneratorsFiles. Tools. Possibilities.
EN
Saved0
Two white linen towels on a wooden rack, one with an eyelet lace border of diamond motifs and dots, the other with a scalloped edgeVisualization
DW-300066 · UPDATED 11/21/2026

Eyelet Lace Border SVG, Scalloped Edge Card DXF, Broderie Anglaise Trim Laser Cut File, Fancy Edge Card Template

Two rectangular panels with a scalloped bottom edge: a tall one with an eyelet lace border of three diamond-shaped flower motifs, teardrop clusters and a row of small dots, and a shorter plain one with the same wavy edge. The free SVG and DXF hold cut lines only and lay both out in 816.6 × 593.1 mm (32.15 × 23.35 in), so scale them to card, tag or trim size.

Author
DXF World · 530 files
Formats
SVG, DXF
Size
817 × 593 mm (32.15 × 23.35 in)
Material
Plywood, MDF, acrylic or metal (scale to your piece)
Cut length
6.60 m
Est. time, 10 W diode (3 mm)
21 min 59 s
Est. time, 40 W CO2 (3 mm)
9 min 10 s
Layers
CUT only, no engraving

Free account required to download

How to make it

  1. 01Scale the panels to your card, tag or trim width and check the smallest eyelets.
  2. 02Cut the tall lace panel from the top material and the plain scalloped panel from a contrast colour.
  3. 03Layer the plain panel behind the lace one, or fold it as a card back, and glue along the top edge.
  4. 04Add a message, a ribbon through two eyelets or a wax seal to finish the card.

Two panels that work together

The tall panel carries the decoration. Along its lower edge sit three diamond motifs made of pointed leaves around a small round centre, with clusters of teardrops between them and a line of tiny eyelet holes following the scallops. The short panel has the same scalloped edge and nothing else. Use the short one as a liner or a second layer, so the lace border sits over a different colour, or as the back flap of a folded card.

Scaling it for cards

The file is drawn large. For a standard A2 card (4.25 × 5.5 in), scale the tall panel to about 108 mm wide and fold a matching card base. The smallest eyelets then become tiny, so check that a paper cutter or a laser at low power still cuts them cleanly; if not, delete the smallest dot row. Pearl cardstock and vellum look elegant for wedding invitations, christenings and anniversary cards. For a pocket envelope, add a fold line above the border.

Beyond paper

The photo shows the same border trimmed into white linen towels, a good reminder that broderie anglaise is a textile look. At the drawn size the tall panel makes a shelf edge, a drawer front overlay or a cabinet trim in 3 mm plywood or white acrylic. Cut in synthetic felt, it becomes a table runner end or a curtain tie.

Questions about this file

What is in the file?

Two panels with the same scalloped edge: one with a three-motif eyelet lace border and one plain.

Can a cutting machine cut it?

Yes, the SVG imports into most paper cutters. Delete the smallest dot row if it tears at card size.

Which paper works best?

Smooth cardstock of 200–300 gsm, pearl card or heavy vellum keeps the eyelets crisp.

Can I use it for wood trim?

Yes, at full size it is a shelf or cabinet edge in 3 mm plywood or acrylic.

Can I make the border longer?

Copy the motif and dot cluster sideways and extend the scallops to the new width.

Similar files