DXF / SVG / GeneratorsFiles. Tools. Possibilities.
EN
Saved0
Light plywood slot-together rocking chair with a slatted seat, round cut-out side panels and arched back rail on a rug in a nurseryVisualization
DW-300087 · UPDATED 11/21/2026

Doll Rocking Chair SVG, Miniature Wooden Chair Laser Cut File, Teddy Bear Rocker DXF, Slot Together Toy Furniture

Parts for two pieces of small slot-together furniture, a rocking chair and a straight chair, drawn for 4 mm wood as the label in the file says. Its SVG and DXF, free to download, contain 12 parts on a 283.4 × 289.4 mm (11.16 × 11.39 in) layout. The seats and backs have long slats, the sides lock into the seat with slots and tabs, and the rocking chair has curved runners with a round cut-out.

Author
DXF World · 530 files
Formats
SVG, DXF
Size
283 × 289 mm (11.16 × 11.39 in)
Material
Plywood, MDF, acrylic or metal (scale to your piece)
Cut length
5.87 m
Est. time, 10 W diode (3 mm)
19 min 34 s
Est. time, 40 W CO2 (3 mm)
8 min 09 s
Layers
CUT only, no engraving

Free account required to download

How to make it

  1. 01Delete the text label, then test-cut a single joint from your 4 mm sheet.
  2. 02Cut all 12 parts and sand away any burn marks on the tabs.
  3. 03Slide the seat and cross panels into one side frame, then press the second side frame on.
  4. 04Fit the slatted back, add a drop of glue where joints feel loose and finish with paint or oil.

What is in the layout

The file holds 12 flat parts: three pairs of curved side frames (one pair with rocker runners and a round hole, one pair with legs, one pair with arched top rails), two slatted seat panels, a slatted back, and three small cross panels with slots. Tabs on the seats and panels push into the slots in the side frames. A small label reading Wood of 4mm is drawn with the parts; delete it before cutting or it will be cut out as letters.

Material and scale

The slots are drawn for 4 mm plywood, so cut it at the drawn size from 4 mm sheet and measure one slot in your software first, because real plywood is often a little thinner or thicker. At this size the chairs suit dolls, plush toys and figurines. To build a bigger chair, scale the whole file and use board as thick as the scaled slots; doubling the size, for example, needs 8 mm board. Always test one joint before cutting everything.

Gift and play ideas

Pair the rocking chair with a teddy bear for a baby shower or a nursery shelf. Painted in soft colours, the set suits a dollhouse living room; left natural and oiled, it is a small display piece for a craft fair table. Engrave a name on the back slats for a personal keepsake.

Questions about this file

What thickness is it for?

4 mm plywood, as labelled in the file. Measure the slots before cutting, since sheet thickness varies.

How big are the finished chairs?

The whole layout is 283.4 × 289.4 mm, so each chair is doll or teddy bear size, not for children to sit on.

Can I make a chair a child can sit on?

Scaling up also widens the slots, so you need much thicker board, and a seat for a child needs stronger joints than this toy design has.

Do I need glue?

The joints are a snug push fit; glue them if the chairs will be played with.

Will acrylic work?

Yes, 4 mm acrylic works if the slots match your sheet, but plywood is kinder to drops and play.

Similar files