VisualizationHalloween Cat SVG, Scared Black Cat Laser Cut File, Arched Back Cat Silhouette DXF, Spooky Decor
A classic startled Halloween cat: back arched, tail bristling upward, whiskers out, with cut-out eyes split by slit pupils and a small nose hole. The free download is one SVG and one DXF file at 307.3 × 345.4 mm (12.1 × 13.6 in), cut lines only, in a single solid piece that stands, hangs or goes in a window.
- Formats
- SVG, DXF
- Size
- 307 × 345 mm (12.10 × 13.60 in)
- Material
- Plywood, MDF, acrylic or metal (scale to your piece)
- Cut length
- 2.18 m
- Est. time, 10 W diode (3 mm)
- 7 min 15 s
- Est. time, 40 W CO2 (3 mm)
- 3 min 01 s
- Layers
- CUT only, no engraving
Free account required to download
How to make it
- 01Scale the cat to your display size and check that the whiskers and legs stay wide enough.
- 02Cut the eye pieces and nose first, then the full outline.
- 03Sand the edges and the area around the whiskers carefully.
- 04Paint it black, then stand it with a small foot strip, hang it or prop it in a window.
The silhouette
The cat stands on four thin legs grouped into two pairs, with its back pushed up in a high arch and its tail standing straight up with a jagged, fluffed edge. Three whiskers stick out on the left. Each eye is cut as two crescent pieces with a vertical slit pupil left between them, and a little triangle forms the nose. That is all: one outline and five small holes, which makes it a quick cut and a good file for a batch of seasonal decor.
Cutting tips
The whiskers and the tips of the tail are the thinnest parts. At the drawn size they are fine in 3 mm plywood, MDF or acrylic; if you scale the cat down for a table piece or a garland, check that the whiskers stay at least 1.5 mm wide, or thicken them in your software. The legs are long and narrow too, so for a standing piece use 6 mm material or glue a strip of wood across the back of the feet. Scaled up to 600–900 mm it makes a yard silhouette in exterior plywood or steel.
Halloween display ideas
Paint it flat black and stand it on a mantel next to pumpkins, set it on a windowsill with a light behind it so the eyes glow, or hang a row of small ones as a garland. Glow-in-the-dark paint on the eye area is a simple extra. For a craft fair, cut it in black acrylic and pair it with a moon or a witch hat cut from the offcuts.
Questions about this file
How many holes are in the design?
Five: two crescent cut-outs for each eye and one small nose hole.
Will it stand up on its own?
The legs are narrow, so add a strip of wood or a small base behind the feet, or cut it from 6 mm material.
Can I make it into a yard decoration?
Yes. Scale it to 600 mm or more and cut it from exterior plywood, HDPE or steel, then seal or paint it for outdoor use.
How small can I go?
Around 150 mm tall works for ornaments if you thicken the whiskers. Below that they break off.
Do I need to paint it black?
Black acrylic saves painting. Orange, purple or glow paint also work well for kids' rooms.
Similar files



