VisualizationFootball SVG Cut File, American Football Sign Blank DXF, Game Day Wall Decor Laser Cut File, Football Party Cutout
A large tilted American football shape with curved stripe windows near both tips, a lace panel with the laces left as bridges, and a wide plain area in the middle. The free SVG and DXF hold cut lines only at 630 × 469.7 mm (24.8 × 18.49 in), ready to scale for a door sign, a party prop or a team room wall.
- Formats
- SVG, DXF
- Size
- 630 × 470 mm (24.80 × 18.49 in)
- Material
- Plywood, MDF, acrylic or metal (scale to your piece)
- Cut length
- 5.15 m
- Est. time, 10 W diode (3 mm)
- 17 min 10 s
- Est. time, 40 W CO2 (3 mm)
- 7 min 09 s
- Layers
- CUT only, no engraving
Free account required to download
How to make it
- 01Scale the ball to your sign and check that the lace bridges and crescent points stay at least 3 mm wide.
- 02Cut the outline and the stripe and lace windows from plywood, MDF or acrylic.
- 03Stain the ball brown and paint or back the windows white to show the stripes and laces.
- 04Engrave or paint a name or number in the plain center, then add a hanger or a stand.
The design
The ball leans to the right like a pass in flight. Near the left tip a round end panel is framed by two curved stripe openings, and at the right tip a long crescent opening marks the other stripe. The lace panel at the top is open, with a row of cross stitches and a seam line left as bridges, so light or a coloured backing shows through. Everything else is one smooth plain surface, the natural place for a player name, a number or a team year.
Scaling and cutting tips
At the full 630 mm it makes a sign that is seen across a room. The narrow points of the crescent opening on the right are the weakest spot, and the lace bridges are thin too, so do not shrink the ball much below 250 mm in 3 mm plywood. Larger versions in 6 mm plywood or MDF cut well on a CNC router, and a steel version from a plasma table holds up outside a garage.
Game day and gift ideas
Glue a brown-stained ball onto a white backer so the stripes and laces show white. Engrave a name and number for a senior night gift, cut a few 250 mm balls as table centrepieces for a football party, or hang a big one over the snack table on game day. Coaches like a version with the team roster engraved across the middle.
Questions about this file
Is this a football or a rugby ball?
It is an American football with laces and end stripes. A rugby ball has no laces, so you would need to remove the lace window.
How do I show white stripes and laces?
Glue the cut ball onto a white backing board or white acrylic; the windows then show the stripes and laces in white.
Can I add a team name?
Yes. Add text in the plain middle area as engraving or paint, and keep it clear of the stripe openings.
How small can this football sign be cut?
Around 250 mm wide in 3 mm plywood. Smaller than that, the lace bridges and the thin crescent tip break easily.
Can it go outside?
Cut it from steel or exterior plywood and seal every edge with outdoor varnish before hanging it outdoors.
Similar files



