VisualizationAlhambra Pattern Screen SVG, Moorish Star Panel Laser Cut File, Tall Arabesque Divider DXF, Metal Floor Screen
A tall decorative screen panel in the Moorish style of the Alhambra palace: rosettes of small petal cut-outs around round centers, linked by star-and-kite strapwork, with a solid strip at the bottom carrying the word ALHAMBRA in outlined capitals. The free download is one SVG and one DXF file drawn at 42.2 × 84.5 mm (1.66 × 3.33 in), cut lines only, meant to be scaled up to screen size while keeping its 1:2 proportions.
- Formats
- SVG, DXF
- Size
- 42 × 85 mm (1.66 × 3.33 in)
- Material
- Plywood, MDF, acrylic or metal (scale to your piece)
- Cut length
- 4.22 m
- Est. time, 10 W diode (3 mm)
- 14 min 04 s
- Est. time, 40 W CO2 (3 mm)
- 5 min 52 s
- Layers
- CUT only, no engraving
Free account required to download
How to make it
- 01Scale the panel to your target height, keeping width and height locked in a 1:2 ratio.
- 02Decide whether the ALHAMBRA word is cut, engraved or replaced, and edit the base strip.
- 03Test-cut one rosette with its petal ring, then cut the full panel with inner openings first.
- 04Clean up the edges, paint or powder-coat the panel, and bolt it into a frame or onto feet.
The pattern
The panel is twice as tall as it is wide. Seven rows of round rosettes, alternating two and three per row, each made of a ring of tiny petal openings around a center dot, sits in a web of strapwork with small stars, four-point sparks and rounded kite openings between them. The pattern is cut off by a thin edge at the sides and top, and closes at the bottom with a plain band, where the word ALHAMBRA is drawn in serif capitals. The photo shows it as a black steel floor screen with bolts at the corners, letting dappled light through onto the wall.
Scaling it up
The file is drawn very small, so scale it before cutting. Some useful sizes:
- 400 × 800 mm: a window insert or cabinet door panel, 3–4 mm plywood on a laser.
- 600 × 1200 mm: a wall panel or headboard, 6–9 mm MDF on a CNC router.
- 900 × 1800 mm: a full-height floor screen in 2 mm steel on a plasma table or fiber laser.
The petal rings are the finest detail; below 400 mm tall they get too small for most lasers.
About the lettering
The letters are outlines, so a straight cut drops out their centers (A, B, R). Engrave them instead, cut them as stencil letters, or delete the word and use the base strip for a house name, a date or bolt holes. The tiny dots along the side edges mark fixing points; scale them to suit your screws.
Questions about this file
Why is the file so small?
It is drawn at 42.2 × 84.5 mm. Scale it up to the size you need; the outlines are vectors and stay sharp.
Can I remove the word at the bottom?
Yes. Delete the letter outlines and the strip stays as a solid base, ready for your own text or mounting holes.
What is the smallest practical size?
About 400 mm tall on a laser. Smaller than that, the petal openings around each rosette become specks.
Is it suited to a garden screen?
Yes, in powder-coated steel or aluminum, or in exterior PVC board, mounted in a timber or metal frame.
Can I put several side by side?
Yes. Line up two or three panels with a small gap, or join them in a long frame for a balcony or fence.
Similar files



