VisualizationStanding Horse Silhouette SVG, Solid Horse Laser Cut File, Horse Yard Sign DXF, Equestrian Wall Decor Cutout
A plain solid silhouette of a horse standing quietly in side view, head slightly lowered, tail hanging straight and all four hooves on the ground, with no inner cut-outs. You can download it free in SVG and DXF formats with cut lines only, at 353.1 × 289.6 mm (13.90 × 11.40 in), and its single outline scales cleanly from a small ornament to a life-size yard figure.
- Formats
- SVG, DXF
- Size
- 353 × 290 mm (13.90 × 11.40 in)
- Material
- Plywood, MDF, acrylic or metal (scale to your piece)
- Cut length
- 1.70 m
- Est. time, 10 W diode (3 mm)
- 5 min 40 s
- Est. time, 40 W CO2 (3 mm)
- 2 min 22 s
- Layers
- CUT only, no engraving
Free account required to download
How to make it
- 01Scale the silhouette to the height you want and pick a material that keeps the legs strong.
- 02Clean up the file by deleting the few zero-size points, then cut the outline.
- 03Sand or grind the edges smooth, paying attention to the thin lower legs.
- 04Paint or seal it and mount it on a wall, a stand or ground stakes.
A clean outline
This is the simplest kind of horse file: one continuous outline with a natural, relaxed stance, pricked ears, a defined jaw and fetlocks, and the tail falling close to the hind legs. With no inner cuts or thin bridges, it cuts fast and survives any scale and any material. The photo shows it in matte black at near life size, standing on a rug in a farmhouse living room like a statue.
Sizes and materials
At the drawn 353.1 mm it is a shelf piece or a wall plaque in 3 to 6 mm plywood. Enlarged to 1 to 2 metres it becomes a paddock or barn sign cut on a CNC router from 18 mm exterior plywood or on a plasma table from 2 to 3 mm steel. Because the legs are the narrowest part, use a stronger material or a support behind them for large standing versions. Acrylic in black or mirror finish makes elegant small trophies.
Ideas for using it
Give a standing figure two stakes or a back brace and set it in a garden or at a stable entrance. Indoors, paint it black for a modern look or use it as a stencil and paint the shape directly on a wall. Engrave a horse's name and dates for a memorial plaque, cut a dozen small ones as place cards for an equestrian party, or use it as a backer shape for a riding club trophy.
Questions about this file
Does it have any inner details?
No, it is a solid shape. Add engraved lines for the mane or eye in your software if you want detail.
Can I make it life-size?
Yes. A single outline scales without problems; cut large ones on a CNC router or plasma table.
How do I make it stand outdoors?
Screw a brace to the back or fit two steel stakes behind the legs and set them in the ground.
Which material suits a yard sign?
Exterior plywood with outdoor paint, or powder-coated steel. MDF does not survive rain.
Can I use it as a stencil?
Yes. Cut it from thin card or plastic and use the hole left behind as a paint stencil.
Similar files



