DXF / SVG / GeneratorsFiles. Tools. Possibilities.
EN
Saved0
Black metal bull moose silhouette with large antlers and coat cut-outs standing on a wooden dresser next to a windowVisualization
DW-300041 · UPDATED 11/21/2026

Bull Moose Silhouette SVG, Moose Laser Cut File, Cabin Wall Art DXF, Wildlife Shelf Sitter Cutout

A single-layer silhouette of a bull moose standing side-on with its head turned toward you, wide palmate antlers, a hanging bell under the chin and small cut-outs that mark light on the shoulders, flank and legs. Both free files, SVG and DXF, hold cut lines only and are sized 200.7 × 170.2 mm (7.90 × 6.70 in) and easy to scale for shelf, wall or yard pieces.

Author
DXF World · 530 files
Formats
SVG, DXF
Size
201 × 170 mm (7.90 × 6.70 in)
Material
Plywood, MDF, acrylic or metal (scale to your piece)
Cut length
2.77 m
Est. time, 10 W diode (3 mm)
9 min 14 s
Est. time, 40 W CO2 (3 mm)
3 min 51 s
Layers
CUT only, no engraving

Free account required to download

How to make it

  1. 01Scale the moose to its final width and check that the antler gaps stay open.
  2. 02Cut the coat highlights and face details first, then the antlers and outline.
  3. 03Remove soot or dross from the antler tips carefully, they are the thinnest parts.
  4. 04Stain or paint it and hang it on the wall or glue it into a base strip.

The silhouette

The moose stands on all four legs with its body to the left and its heavy head looking out of the panel. Both antlers spread wide with many tines and open slots between them, and the face has cut lines for the eye, nostril and muzzle. Instead of a plain black shape, a few irregular openings on the back, flank and legs act like highlights on the coat, which gives the piece depth from a distance. The photo shows it in black steel, standing on a wooden dresser.

Scaling and cutting

At the drawn size it makes an ornament, a magnet or a coaster topper. The antler tips and the narrow gaps between tines are the weak spots, so in wood scale it to at least 300 mm wide; a 600 to 1000 mm version makes a strong cabin wall piece in 6 mm plywood or 2 mm steel. On a plasma table, scale it up until the antler gaps are wider than your kerf.

Display and selling ideas

To make it stand like in the photo, draw a narrow base strip with two slots for the hooves. Rustic stain, matte black paint or rusted steel all suit the subject. Moose silhouettes sell well for lake cabins, hunting lodges and Canadian or northern-themed gift shops, and they pair nicely with a pine tree or a mountain panel as a set.

Questions about this file

Is it a moose or an elk?

It is a bull moose: the antlers are broad and palm-shaped and it has the dewlap under the chin.

Can it stand on a shelf?

Yes, in steel it can balance on its hooves. In plywood, slot the hooves into a thin base strip or add a small stand behind.

How large can I scale it?

There is no upper limit for wall art. Large versions over a metre work well in steel for gates and fences.

Which part breaks most easily?

The antler tines. Keep them in the grain direction of the plywood and do not shrink the file too far.

What finish suits a cabin?

A dark walnut stain or flat black paint. For outdoors, use powder-coated or weathering steel.

Similar files