DXF / SVG / GeneratorsFiles. Tools. Possibilities.
EN
Saved0
Round light plywood sign with a buck, a tall pine and an eagle on a bare tree set over a black backing disc, standing on a wooden shelfVisualization
DW-300042 · UPDATED 11/21/2026

Deer Forest Circle SVG, Buck and Eagle Round Sign Laser Cut File, Pine Tree Wildlife Scene DXF, Hunting Cabin Decor

A round one-piece scene with a white-tailed buck looking up from a grassy ground line, a tall pine on the left and a bare tree on the right with a bald eagle perched on its branch, all held inside a circular frame. Free to download as SVG and DXF, cut lines only, drawn at 111.8 × 111.8 mm (4.40 × 4.40 in) and meant to be scaled to coaster, ornament or wall size.

Author
DXF World · 530 files
Formats
SVG, DXF
Size
112 × 112 mm (4.40 × 4.40 in)
Material
Plywood, MDF, acrylic or metal (scale to your piece)
Cut length
1.93 m
Est. time, 10 W diode (3 mm)
6 min 26 s
Est. time, 40 W CO2 (3 mm)
2 min 41 s
Layers
CUT only, no engraving

Free account required to download

How to make it

  1. 01Scale the circle to the final diameter and, for large signs, redraw the outer ring as a smooth circle.
  2. 02Cut the inner openings around the deer, trees and eagle first, then the outer ring.
  3. 03Cut a solid backing disc of the same size from a contrasting material.
  4. 04Glue the scene onto the backing, sand the edge flush and seal it.

The scene

The ring frame holds everything together: the ground line runs across the bottom, the pine and the broken tree trunk rise to touch the top of the ring, and the eagle sits on a side branch, so every element is joined and nothing falls out. The buck stands in the open centre with a full rack of antlers. In the photo it is cut from light plywood and set in front of a black backing disc, which makes the silhouettes stand out.

Scaling tips

At the drawn 111.8 mm it is ornament or coaster size and the pine needles and antler tips are fine but fragile; 3 mm plywood or acrylic handles them. For a wall sign, 300 to 600 mm is a good range. The outer ring is drawn with short straight segments, which is invisible small but shows as flat spots on a large sign, so swap it for a true circle in your software when you scale up a lot. A plasma version needs at least 500 mm so the needles survive.

Finishing and gift ideas

Glue the cut ring onto a disc of black acrylic, dark stained plywood or painted MDF of the same diameter for the two-tone look. Hunters, birders and cabin owners buy this kind of scene; it also works as a lid insert for a round box, a lamp shade panel with a light behind it or a set of matching coasters.

Questions about this file

Does it need a backing?

No, it is one connected piece. A dark backing disc just makes the animals and trees easier to see.

Why does the edge look slightly angular when enlarged?

The ring is made of short straight segments. Replace it with a true circle of the same size before cutting a large sign.

What size works for a coaster?

The drawn 111.8 mm is about right. Add a solid back so drinks do not drip through.

Can I cut it from metal?

Yes, but scale it to at least half a metre so the pine needles and antler tips are wider than the plasma kerf.

Can I add a name or a date?

Engrave it on the backing disc below the ground line, or add a text plate under the ring.

Similar files