DXF / SVG / GeneratorsFiles. Tools. Possibilities.
EN
Saved0
Birch plywood outline cut-out of a grinning fisherman in a boat with an outboard motor, rod bent by a fish on its own base and cattails beside it, on a tableVisualization
DW-300045 · UPDATED 11/21/2026

Fisherman in Boat SVG, Funny Fishing Line Art Laser Cut File, Fish on the Line Wall Decor DXF, Gift for Fisherman

A comic outline drawing of a grinning fisherman in a wide hat sitting in a small boat with an outboard motor, his rod bent double by a wide-eyed fish on the line, with cattails and water ripples. The free download is one SVG and one DXF file, 304.8 × 213.4 mm (12.00 × 8.40 in), cut lines only; it cuts as a line-art piece of narrow outline strokes plus a few loose ripple and reed parts.

Author
DXF World · 530 files
Formats
SVG, DXF
Size
305 × 213 mm (12.00 × 8.40 in)
Material
Plywood, MDF, acrylic or metal (scale to your piece)
Cut length
8.70 m
Est. time, 10 W diode (3 mm)
29 min 00 s
Est. time, 40 W CO2 (3 mm)
12 min 05 s
Layers
CUT only, no engraving

Free account required to download

How to make it

  1. 01Scale the file to your size, then check the narrowest outline strokes and the fishing line in your software.
  2. 02Cut the line art and a backer board from the outer outline in a contrasting material or color.
  3. 03Paint the parts you want colored, then glue the line art onto the backer, placing the loose ripples by eye.
  4. 04Seal with clear lacquer and add a sawtooth hanger, or stand it on a base as a shelf piece.

What you get

Instead of a solid silhouette, this file is drawn as an outline: every part of the scene, from the hat band with its fishing fly to the motor and the cattails, is a narrow band of material following the shape. Inside the bands are cut-out windows, so the wall or a backer board shows through the face, the shirt and the boat. On the left a big-eyed fish hangs off the line; on the right two cattails rise from a clump of reeds. The ripples under the boat and around the fish come out as separate small pieces. The photo shows it cut in birch plywood and set up as a standing piece with the fish and cattails on their own little bases.

Cutting tips

  • The outline strokes are narrow at 305 mm wide, so 3 mm plywood or acrylic is the right choice. For 6 mm material, scale it up to at least 450 mm.
  • The fishing line is the thinnest part. Thicken it in your software, or let it rest on a backer so it cannot snap.
  • Glue the whole piece onto a backer cut from its outer shape, in a contrasting color, so the loose ripples stay in place.

Gift and selling ideas

This is an easy gift for a dad, grandpa or fishing buddy: hang it in a cabin, a boat house or above a tackle shelf. Paint the boat and hat in bright colors on a plain backer, or engrave a name and "Gone Fishing" on the backer below the boat. It also works as a retirement gift and suits lake-town craft fair tables.

Questions about this file

Is it a solid silhouette?

No. It is outline art: narrow strokes of material with windows between them, so it looks best on a contrasting backer.

Which parts come out separately?

The water ripples under the boat and around the fish and the reeds are small separate pieces; the fisherman, boat, rod and motor are joined.

Can I make it into a 3D standing scene like in the photo?

Yes. Cut the fish and the cattails apart from the main piece and give each its own small base, as shown.

What size suits a wall?

The drawn 305 mm suits a shelf or small wall; 450–600 mm makes a cabin wall piece and lets you use thicker plywood.

Can I add a name?

Engrave it on the backer under the boat, or add a small sign shape to the bow in your design software.

Similar files