VisualizationLeopard SVG, Spotted Big Cat Laser Cut File, Prowling Jaguar Shelf Decor DXF, Safari Animal Cutout
A single-panel cutout of a leopard prowling forward with its head low, its coat shown by more than a hundred cut-out rosette spots and its face drawn with eyes, nose and whiskers. It is a free SVG and DXF download, cut lines only, drawn at 166.5 × 77.2 mm (6.56 × 3.04 in) and easy to scale for shelf or wall decor.
- Formats
- SVG, DXF
- Size
- 167 × 77 mm (6.56 × 3.04 in)
- Material
- Plywood, MDF, acrylic or metal (scale to your piece)
- Cut length
- 2.99 m
- Est. time, 10 W diode (3 mm)
- 9 min 59 s
- Est. time, 40 W CO2 (3 mm)
- 4 min 10 s
- Layers
- CUT only, no engraving
Free account required to download
How to make it
- 01Scale the file to the size you want and check that the narrowest spot bridges stay above 2 mm.
- 02Cut the spots and face details first, then the outline, with air assist on.
- 03Sand the face of the panel lightly and clean the soot from the spots.
- 04Oil or paint it and stand it on a shelf or fix it to a contrasting backer for the wall.
The design
The cat walks to the right with its shoulders up and its head turned toward you, one front paw lifted mid-step and the tail curling at the end. Inside the outline, open rosettes and dots run from nose to tail, and narrow cuts separate the legs from the body so the pose reads clearly even in one flat layer. The photo shows it cut from birch plywood and standing on a sideboard like a carved figure.
Size and scaling
At the drawn size of 166.5 mm it is a magnet, ornament or card topper, and the bridges between the spots are thin. For a shelf sitter like the one in the photo, scale it to 400 mm or more; for a wall piece, 600 to 900 mm works well in 6 mm plywood or MDF, or in steel on a plasma table. The more you shrink it, the weaker the material around the spots, so keep tiny versions in acrylic, which holds thin webs better than wood.
Finishing and selling ideas
A golden oil finish suits the wood look; black acrylic or painted steel gives a modern feel. Mount it on a backer of contrasting colour so the spots show up from across the room. Big cat pieces sell in safari-themed nurseries, as gifts for zoo lovers and as table centrepieces for a jungle-themed birthday party.
Questions about this file
Is it a leopard or a jaguar?
The rosette spots fit either big cat, so you can sell it under both names.
Why is the drawn size so small?
The file is drawn at 166.5 mm wide. It has no slots, so you can scale it freely to any size.
Will a 10 W diode handle all the spots?
Yes, in 3 mm plywood at a moderate size. Above 5 mm thickness it takes several passes and the spots char more.
Will it stand up without a base?
Cut a small slotted foot block or glue a strip behind the paws; the photo shows it simply standing on its feet.
Can I cut it from steel?
Yes, at a large size. Scale it up so the spot bridges are wider than the plasma kerf.
Similar files



