VisualizationRestroom Sign SVG, Unisex Toilet Door Plate Laser Cut File, Man and Woman Bathroom Sign DXF, WC Door Plaque
A simple door plate for a shared restroom: a rectangle with a man figure, a rounded divider bar and a woman figure in a skirt cut out of it. Its free SVG and DXF contain four closed shapes at 38.1 × 25.2 mm (1.50 × 0.99 in), so scale it to a door sign size before cutting. Glue the plate over a contrasting backing so the figures show in a second color.
- Formats
- SVG, DXF
- Size
- 38 × 25 mm (1.50 × 0.99 in)
- Material
- Plywood, MDF, acrylic or metal (scale to your piece)
- Cut length
- 0.33 m
- Est. time, 10 W diode (3 mm)
- 1 min 07 s
- Est. time, 40 W CO2 (3 mm)
- 28 s
- Layers
- CUT only, no engraving
Free account required to download
How to make it
- 01Scale the plate to the sign size you want with the proportions locked, and add corner holes if you use standoffs.
- 02Cut the three figure openings and then the outer rectangle from acrylic or plywood.
- 03Cut or paint a backing panel in a contrasting color and glue the plate on top.
- 04Mount the sign on the door with standoff screws or double-sided tape.
How the sign works
The file is one plate with three openings: a man with arms down and legs apart on the left, a vertical bar in the middle and a woman in an A-line skirt on the right. Cut from a light material and mounted on a dark backing, the figures read as solid symbols, like the white and black plate in the photo. Reverse the colors for a dark door.
Size and material
The drawing is tiny, so scale it to about 200 × 132 mm for a standard door sign or 300 mm wide for an office or a café. Keep the proportions locked when scaling. White or black 3 mm acrylic is the cleanest choice for a café or office; birch plywood with a painted back panel suits a cabin, a farmhouse bathroom or a guest house. The narrowest parts are the necks of the two figures, which stay sturdy at sign size.
Mounting and ideas
Drill four corner holes for standoff screws, as shown, or use strong double-sided tape on a smooth door. Engrave a word such as Toilet or WC under the figures if you want text. Small shops, restaurants and rental homes buy plates like this in sets, and a matching sign for each door is quick to make once the file is set up.
Questions about this file
Why does the figure area look empty after cutting?
The figures are cut out of the plate. Glue a contrasting backing behind it so they show as solid symbols.
What size should a door sign be?
About 150 to 200 mm wide is common for restroom doors; scale the file up from its small drawn size.
Can I make separate men and women signs?
Yes, delete one figure and the bar, then centre the remaining figure on a narrower plate.
Which material looks best?
3 mm white or black acrylic gives a crisp commercial look; plywood suits rustic interiors.
Can I add text?
Yes, add an engraved line such as Restroom or WC below the figures in your software.
Similar files



