DXF / SVG / GeneratorsFiles. Tools. Possibilities.
EN
Saved0
Five tall birch plywood letters spelling AVIAN standing on a wooden table in a bright roomVisualization
DW-300053 · UPDATED 11/21/2026

Avian Name Sign SVG, Tall Wooden Name Letters Laser Cut File, Nursery Name Cutout DXF, Freestanding Shelf Letters

The name AVIAN as five separate tall, narrow capital letters in a slightly wobbly hand-drawn style, with a chunky slab top and bottom on the I. The free SVG and DXF fit the whole word in a 304.8 × 304.8 mm (12 × 12 in) square. Cut from thick plywood, the letters stand up on their own on a shelf or hang on a nursery wall.

Author
DXF World · 530 files
Formats
SVG, DXF
Size
305 × 305 mm (12.00 × 12.00 in)
Material
Plywood, MDF, acrylic or metal (scale to your piece)
Cut length
5.26 m
Est. time, 10 W diode (3 mm)
17 min 31 s
Est. time, 40 W CO2 (3 mm)
7 min 18 s
Layers
CUT only, no engraving

Free account required to download

How to make it

  1. 01Set the letter height, and pick 12 to 18 mm board if the letters must stand.
  2. 02Cut the triangle holes in the two As first, then the outline of every letter.
  3. 03Sand the edges smooth, round the corners slightly and paint or oil each letter.
  4. 04Stand the letters on a shelf, glue them to a base strip or fix them to the wall with hidden hangers.

Letter style

All five letters fill the full height of the square. The two As have a low, slanted crossbar with a small bump on the left side, the V is a long narrow point, the N runs its diagonal from top left to bottom right, and the I stands out with blocky caps on both ends. Each letter is a single piece with no loose inner parts except the triangles inside the As, which drop out.

Material and standing

At 12 in tall and this narrow, the letters stand best when made from 12 to 18 mm plywood with a router, as in the photo; at 6 mm they need a stand or wall fixings. A laser can cut 6 mm plywood or acrylic for wall-mounted letters. The thin top of the V and the tip of the N are the weak points, so scale with care if you go smaller.

Gift and selling ideas

Paint them in a nursery color, spell the name over a crib or set them on a birthday party table. To make another name in the same style, mirror the A or reuse the V and N shapes; letters that are not in the file have to be drawn in a matching hand. Personalised letter sets are steady sellers at markets and baby showers.

Questions about this file

Are the letters connected?

No, AVIAN cuts as five separate letters. Space them as you like or glue them to a base strip.

Will they stand on their own?

In 12 to 18 mm plywood at full size, yes. Thinner letters need a base or wall fixing.

Can I spell another name?

Only A, V, I and N are in the file, so other letters must be drawn in a matching hand-drawn style.

How do I hang them?

Add small keyhole slots on the back with a router, or use mounting tape for light letters.

Are they safe for a nursery?

Sand all edges, use child-safe paint and fix them out of reach of the crib.

Similar files