DXF / SVG / GeneratorsFiles. Tools. Possibilities.
EN
Saved0
Two-tone dahlia wall art with white petal outlines over a teal backing, hanging on a beige wall beside a windowVisualization
DW-300047 · UPDATED 11/21/2026

Dahlia Flower SVG, Layered Dahlia Wall Art DXF, Two Tone Flower Laser Cut File, Petal Outline Mosaic Template

A full dahlia bloom drawn as a lattice of pointed petal outlines, spiralling out from a tight centre in many overlapping rows. The free SVG and DXF hold cut lines only and measure 75.1 × 72.5 mm (2.96 × 2.85 in) as drawn, so the design is meant to be scaled up and glued over a coloured backing board for a two-layer flower.

Author
DXF World · 530 files
Formats
SVG, DXF
Size
75 × 73 mm (2.96 × 2.85 in)
Material
Plywood, MDF, acrylic or metal (scale to your piece)
Cut length
2.39 m
Est. time, 10 W diode (3 mm)
7 min 58 s
Est. time, 40 W CO2 (3 mm)
3 min 19 s
Layers
CUT only, no engraving

Free account required to download

How to make it

  1. 01Scale the dahlia to at least 300 mm and check that the petal outlines are 2 mm wide or more.
  2. 02Cut the petal web from 3 mm plywood and a solid backing from the outer outline with a small offset.
  3. 03Paint the backing in your main colour and the web in a lighter or darker contrast colour.
  4. 04Glue the web onto the backing under light weight, then add a sawtooth hanger on the back.

How the layers work

Cut the file and you get a web of thin petal frames: every petal shape drops out and the outlines stay joined as one lacy piece. Glue that web onto a solid backing, and the petal holes show the colour beneath. In the photo the web is white and the backing is deep teal, which makes each petal stand out like a tile in a mosaic. You can also keep the dropped-out petals, paint them in two or three shades and glue them back into their holes for a fully coloured dahlia.

Scale it up first

At the drawn 75.1 mm the petal outlines are far too thin to survive cutting, so treat the file as a vector to enlarge. Around 300 mm it becomes a coaster-sized flower for a frame, at 500–600 mm it is a proper wall piece like the one shown. Keep the outline width at 2–3 mm or more in your software; if it gets too thin, thicken the strokes before cutting. 3 mm plywood or MDF works for the web, with 3 mm MDF or acrylic for the backing.

Colour ideas

White on teal is calm and modern. Try blush pink on cream for a nursery, gold on black for an evening look, or a dark wood web over yellow for a sunflower feel. Cut the backing as the same outline with a few millimetres of offset so the edge stays tidy. Dahlias are popular for late-summer birthdays, garden club prizes and florist shop walls.

Questions about this file

Why is it so small?

It is drawn at 75.1 × 72.5 mm. Scale it up before cutting; at that size the outlines are too thin.

Do I need a second file for the backing?

No, offset the outer contour in your software by a few millimetres and cut it as a solid shape.

Does it look good in acrylic?

Yes, a white or mirror acrylic web over a coloured backing looks sharp; cut slowly to avoid melting the narrow outlines.

Can I use the loose petals?

Keep them, paint them and glue them back for a mosaic flower, or use them as confetti on a gift box.

How do I hang it?

Glue a sawtooth hanger or a keyhole plate to the backing board, centred near the top.

Similar files