DXF / SVG / GeneratorsFiles. Tools. Possibilities.
EN
Saved0
Tall birch plywood tiered spice rack with three steps and nine bays, bamboo-lid spice jars on the upper steps, kraft spice pouches on the lowest step and wooden spoons at the side, on a kitchen counterVisualization
DW-101062 · UPDATED 11/16/2026

Tiered Spice Rack SVG, 9 Compartment Spice Stand Laser Cut File, Stepped Jar Shelf DXF

A free laser-cut file for a tall three-step spice rack, each step divided into three bays by two dividers, for nine bays in total. It is 290 × 200 × 210 mm (11.42 × 7.87 × 8.27 in), uses 15 plywood pieces that join with tabs and slots, and is provided as SVG and DXF in separate versions for 3, 4, 5 and 6 mm plywood, with small engraved part numbers to guide assembly.

Author
DXF World · 281 files
Formats
SVG, DXF
Outer size (W × D × H)
290 × 200 × 210 mm (11.42 × 7.87 × 8.27 in)
Parts
15
Material thickness
3, 4, 5 or 6 mm plywood (a file for each)
Layout size (3 mm file)
1,180 × 337 mm
Cut length
10.09 m
Est. time, 10 W diode (3 mm)
33 min 39 s
Est. time, 40 W CO2 (3 mm)
14 min 01 s
Layers
CUT only, no engraving

Free account required to download

How to make it

  1. 01Choose the file for your plywood (4 mm or more is best for a fully loaded rack) and test one slot.
  2. 02Cut the fifteen numbered pieces over two or three sheets, as the full layout is 1180 mm long.
  3. 03Lay the left side down, fit the shelves, step boards and back brace by number, add the right side, then slide in the six dividers.
  4. 04Glue the side joints for strength, sand the edges and seal before filling the nine bays.

Nine bays on three steps

This is the larger of the two tiered racks: 290 mm wide and 210 mm tall, with two dividers on every step. In the photo the top two steps carry one matching bamboo-lid jar per bay, filled with whole peppercorns, herbs, chili, turmeric and rice, while three kraft pouches stand in the low front bays.

How to cut fifteen parts

The layout for the 3 mm file is 1180 × 337 mm, so plan to split it over three sheets on a typical desktop machine. Timings for the 3 mm file: about 33 min 39 s on a 10 W diode, about 14 min 01 s on a 40 W CO2 and about 6 min 44 s on a 100 W CO2. A 10 W diode cuts 3 mm in one or two passes; for 5 or 6 mm birch use a stronger tube or several passes.

Each piece has a small engraved number. Lay the left side flat, fit the shelves, step boards and brace in order, close it with the right side and stand it up. The six dividers slide into the steps at the end. With nine full glass jars the rack carries real weight, so glue the side joints or use 4 mm plywood or thicker.

For shops and kitchens

  • Spice shops and delis use a rack like this to display sample jars on the counter.
  • Brand the front board with your shop name as your own engraving.
  • Finish with lacquer for easy cleaning.

Questions about this file

How much space does the rack need?

It needs 290 × 200 mm of counter and 210 mm of height. Check the clearance under your wall cabinets.

What fits in each bay?

One medium jar per bay on the upper steps, as in the photo, and pouches or short jars on the front step.

Is it a good shop display?

Yes, nine bays let you show a full range of blends at eye level. Engrave your logo on the front board if you like.

Which material holds up best?

Birch plywood of 4 or 5 mm gives a solid stand. MDF works but should be sealed against kitchen humidity.

What are the small numbers on the pieces?

They are engraved part numbers that tell you which shelf or step board goes where. They are the only engraving in the file.

Similar files