VisualizationWipes and Pad Organizer SVG, Wide Bathroom Tray with Tampon Column, Feminine Care Laser Cut DXF
A wide 400 mm organizer with a wipes bay on the left, a broad center bay for pads standing upright and a stepped three-bay column on the right for tampons and liners. It comes in SVG and DXF for 3, 4, 5 and 6 mm plywood, measures 400 × 180 × 110 mm (15.75 × 7.09 × 4.33 in), and assembles from 9 tab-and-slot parts with a sloped front. The download is free.
- Formats
- SVG, DXF
- Outer size (W × D × H)
- 400 × 180 × 110 mm (15.75 × 7.09 × 4.33 in)
- Parts
- 9
- Material thickness
- 3, 4, 5 or 6 mm plywood (a file for each)
- Layout size (3 mm file)
- 1,584 × 302 mm
- Cut length
- 7.00 m
- Est. time, 10 W diode (3 mm)
- 23 min 20 s
- Est. time, 40 W CO2 (3 mm)
- 9 min 43 s
- Layers
- CUT only, no engraving
Free account required to download
How to make it
- 01Open the file for your plywood thickness and test the slot fit with a single tab.
- 02Cut the 9 parts and mark the taller 94.8 mm cross divider, which sits at the back of the right column.
- 03Set the two long dividers into the base, add both cross dividers to the right column, then fit the back, sloped sides and front.
- 04Sand and finish, then put wipes on the left, pads upright in the center and tampons and liners in the stepped column.
Wipes, upright pads and a stepped column
Two full-depth dividers split this long box into three columns. On the left is a dedicated bay for a pack of wipes. The middle column is the widest, and the pads in the photo stand upright in a long row, wrapper edges up, so you can count what is left at a glance. The right column has two cross dividers of different heights (94.8 mm and 80 mm), giving three bays that step down toward the 66 mm front: tampons at the back, then two sizes of liners. It is a good layout for someone who uses mainly pads but keeps wipes and a few tampons close.
Cutting
The 9 parts are the five box panels, two dividers of 180 × 110 mm and the two 122.4 mm cross dividers. The 3 mm layout is 1584 × 302 mm. Since front, back and base are 400 mm long, your bed must take 400 mm in one direction; the rest can be split over extra sheets. For the 3 mm file: about 23 min 20 s with a 10 W diode, about 9 min 43 s with a 40 W CO2, about 4 min 40 s with a 100 W CO2. Run 5 and 6 mm on a CO2, or with several passes on a diode.
Selling
Listing photos work best with the pads standing in the middle column, as it shows off the upright storage. Sell it as a bathroom counter organizer, as a changing station box (it also takes nappies and baby wipes), or in a set with a soap dispenser tray.
Questions about this file
Can pads stand upright in the center bay?
Yes, the center column is the widest and folded pads stand on edge in a long row, as shown in the photo.
Why are the right-hand bays at different heights?
The two cross dividers are 94.8 mm and 80 mm tall, so the three bays step down toward the front and stay visible.
Does it work as a baby changing station box?
It does: the wipes bay takes baby wipes and the wide center column holds small nappies standing up.
Acrylic or plywood?
Plywood is lighter and warmer looking; acrylic in the matching thickness is easier to wipe clean. Test a slot either way.
How do I seal it for a wet bathroom?
Use two coats of clear water-based lacquer or hardwood oil on every face and let it cure before loading.
Similar files
