VisualizationFeminine Care Organizer SVG, Large Pad and Tampon Box, Deep Bathroom Vanity Storage Laser Cut DXF
A large, deep feminine care organizer with two big bays at the back and three smaller ones in front, for pads, wipes, tampons and liners. Files are SVG and DXF, one for each of 3, 4, 5 and 6 mm plywood; the outer size is 380 × 220 × 110 mm (14.96 × 8.66 × 4.33 in), with 9 tab-and-slot parts and a sloped front. Free to download.
- Formats
- SVG, DXF
- Outer size (W × D × H)
- 380 × 220 × 110 mm (14.96 × 8.66 × 4.33 in)
- Parts
- 9
- Material thickness
- 3, 4, 5 or 6 mm plywood (a file for each)
- Layout size (3 mm file)
- 1,220 × 342 mm
- Cut length
- 7.40 m
- Est. time, 10 W diode (3 mm)
- 24 min 41 s
- Est. time, 40 W CO2 (3 mm)
- 10 min 17 s
- Layers
- CUT only, no engraving
Free account required to download
How to make it
- 01Choose the file for your plywood and check one tab in one slot on scrap before cutting.
- 02Cut the 9 parts and set aside the one tall 111.5 × 110 mm divider for the back row.
- 03Fit the cross divider into the base, add the tall divider behind it and the two low dividers in front, then attach the back, the sides and the low front.
- 04Sand, seal, and fill the two big back bays with pads and wipes and the three front bays with day pads, tampons and liners.
Big back row, small front row
This is one of the deepest boxes in the set at 220 mm, and the depth goes into the back row. A cross divider runs the full 380 mm length at 85.2 mm high. Behind it, one tall divider makes two large bays, about half the length each: in the photo, lilac overnight pads on the left and a big pack of wipes with a lid on the right. In front, two lower dividers make three equal bays for peach day pads, tampons and patterned liners. The front wall is 61 mm, so the front bays are easy to reach while the bulk sits behind.
Laser time
Expect about 24 min 41 s on a 10 W diode, about 10 min 17 s on a 40 W CO2 and about 4 min 56 s on a 100 W CO2 for the 3 mm file. Diode users should stay with 3 or 4 mm; the 5 and 6 mm files cut best on a CO2. The 3 mm layout is 1220 × 342 mm. The base (380 × 220 mm) is the biggest part, so place it first when you split the layout across smaller sheets. The three short dividers are all 111.5 mm long, but only one of them is the tall 110 mm piece for the back row.
Making a set
Big households and shared bathrooms are the natural buyers. Pair this box with a smaller two-bay caddy for a handbag drawer, or with a tissue box cover in the same finish. Stocked versions sell for hotel and Airbnb bathrooms, where guests appreciate finding supplies.
Questions about this file
How deep is this organizer?
It is 220 mm (8.66 in) deep, so it needs a vanity or shelf of at least that depth.
What fits in the large back bays?
Each one is about half the box length wide: room for a big stack of overnight pads or a family-size pack of wipes.
Can I make it smaller?
Reduce the panel sizes in your editor but keep each slot at the material thickness so the tabs still lock.
Should I glue it?
Gluing is optional. The tabs hold the box square; a drop of glue in the base slots makes it permanent.
Which finish suits a shared family bathroom?
A water-based polyurethane in satin wipes clean and stands up to splashes; give the base underside one coat as well.
Similar files
