VisualizationUpright Pad Holder SVG, Six Slot Feminine Hygiene Sorter, File Box Style Bathroom Organizer DXF
A six-slot holder in which pads, liners, tampons and wipes stand on edge in one row, like files in a sorter, behind a sloped front. It is supplied as SVG and DXF for 3, 4, 5 and 6 mm plywood, measures 360 × 160 × 120 mm (14.17 × 6.30 × 4.72 in), and is made from 10 tab-and-slot parts. Free download.
- Formats
- SVG, DXF
- Outer size (W × D × H)
- 360 × 160 × 120 mm (14.17 × 6.30 × 4.72 in)
- Parts
- 10
- Material thickness
- 3, 4, 5 or 6 mm plywood (a file for each)
- Layout size (3 mm file)
- 1,424 × 292 mm
- Cut length
- 7.58 m
- Est. time, 10 W diode (3 mm)
- 25 min 15 s
- Est. time, 40 W CO2 (3 mm)
- 10 min 31 s
- Layers
- CUT only, no engraving
Free account required to download
How to make it
- 01Match the file to your plywood thickness and cut one slot as a fit test on scrap.
- 02Cut the 10 parts; all five dividers are identical and interchangeable.
- 03Push the dividers into the base, fit the back panel, add the sloped sides and press the low front into place.
- 04Sand the divider tops smooth, seal the wood, and stand pads, liners, tampons and wipes on edge in the six slots.
Packs stand upright
Five identical dividers, each 160 × 120 mm, run front to back and create six narrow slots of equal width. Instead of lying in stacks, wrapped pads and liners stand on edge like index cards, so you flip through them with one finger and pull out the one you want. In the photo the slots hold, left to right: white pads, pink pads, white liners, two slots of tampons standing on end, and a stack of mint wipes. The sloped sides drop from 120 mm to 60 mm, which tilts nothing but lets you see the top of every pack.
Five dividers, one rhythm
Because all dividers are the same, assembly is quick and nothing can go in the wrong place. Slide them into the base, add the back, then the two sloped sides and the front. The 3 mm file takes about 25 min 15 s on a 10 W diode, about 10 min 31 s on a 40 W CO2 and about 5 min 03 s on a 100 W CO2; the many dividers mean a longer cut line than a two-bay box of similar size. The 3 mm layout is 1424 × 292 mm, too long for most hobby beds, so move the five dividers onto their own sheet.
Selling ideas
The upright sorter look is easy to photograph and easy to explain in a listing. Sell it for bathrooms with little counter depth, for office restrooms where people grab one item at a time, or as a sorted gift set with one slot per absorbency. It also doubles as a holder for sheet masks or tea bags, which widens the audience.
Questions about this file
Do pads really stand on edge in these slots?
Yes, individually wrapped folded pads stand upright like cards in a file box, which makes it easy to pick one without disturbing the rest.
What else can go in the six slots?
Sheet masks, tea bags, cotton pads or makeup wipes all stand the same way, so the box also works in a kitchen or on a vanity.
Can I cut it from MDF instead of plywood?
Yes, with the file for the matching thickness. Seal MDF carefully if it will stand near a basin.
Which thickness suits thin dividers?
4 mm keeps the five dividers from flexing, but 3 mm is fine for wrapped pads and cuts faster on a diode.
How do I keep the divider tops smooth?
Sand each divider top with fine paper before assembly, then seal; smooth tops stop wrappers from catching as you pull a pad out.
Similar files



