VisualizationTwo Tier Snack Organizer SVG, Cracker and Cookie Holder Laser Cut File, Kitchen Snack Caddy, Pantry Tray DXF
A two-tier snack organizer with two wide back bays for cracker and cookie packs and three front cells for bars, nuts and dried fruit. It comes as SVG and DXF with separate files for 3, 4, 5 and 6 mm plywood, measures 340 × 240 × 100 mm (13.39 × 9.45 × 3.94 in), and is cut from 9 pieces into 5 compartments. The sides slope down to a 50 mm front, it assembles with tabs and slots, and it is a free download.
- Formats
- SVG, DXF
- Outer size (W × D × H)
- 340 × 240 × 100 mm (13.39 × 9.45 × 3.94 in)
- Parts
- 9
- Material thickness
- 3, 4, 5 or 6 mm plywood (a file for each)
- Layout size (3 mm file)
- 1,180 × 352 mm
- Cut length
- 7.16 m
- Est. time, 10 W diode (3 mm)
- 23 min 52 s
- Est. time, 40 W CO2 (3 mm)
- 9 min 57 s
- Layers
- CUT only, no engraving
Free account required to download
How to make it
- 01Choose the file for your plywood (3, 4, 5 or 6 mm) and test a front divider in one slot on scrap.
- 02Cut the nine pieces; place the base on its own sheet if the 1180 mm layout is too long for your bed.
- 03Assemble base, sides and back, insert the cross divider, add the single back divider and the two front dividers, and fit the front wall.
- 04Sand and finish, then fill the two back bays with crackers and cookies and the three front cells with smaller packs.
Wide at the back, narrow at the front
A full-width cross divider about 77 mm tall separates two rows. The back row has a single divider, so it forms two wide bays of about 165 mm each, big enough for square cracker packs and round cookie packs to stand side by side. The front row is deeper and split into three cells for granola bars, nut mixes, and dried apricots or cranberries. With the tall packs at the back and short ones in front, the whole selection is visible from across the kitchen.
Making it
Nine parts go into the file: front, back, two sloped sides, base, the cross divider, two front dividers and one back divider. The 3 mm layout measures about 1180 × 352 mm; on a compact laser, cut the base by itself and the walls on a second or third sheet. Allow about 23 min 52 s for the 3 mm file on a 10 W diode, about 9 min 57 s on a 40 W CO2 and about 4 min 46 s on a 100 W CO2. Diode owners should stick to 3 or 4 mm for clean edges; 5–6 mm takes several passes.
Fit sides and back to the base, add the cross divider, then the back divider and the two front dividers, and put the 50 mm front on last. The fit is snug enough to skip glue, and a few drops make it permanent.
Make it a set
Sand the bay edges and finish with oil or clear lacquer. Pair it with the six-section snack bin or a bag organizer from the same series. For gifting, fill the wide back bays with cookies and tie a ribbon around the box; for a shop listing, an engraved name on the front panel is an easy custom option.
Questions about this file
Why two bays in back and three in front?
Cracker and cookie packs are wide, so the back gets two roomy bays; bars and nut packs are narrow and suit three smaller cells.
Can I resize it for a pantry shelf?
Change the outer dimensions to fit the shelf, but keep every slot at your plywood thickness so the dividers still slide in snugly.
Can it be made from MDF?
Yes, 3 mm MDF cuts cleanly and is easy to paint in kitchen colors. Seal it, as MDF soaks up moisture.
Do the dividers need glue?
They lock into the base and cross divider without glue; a dab of glue only helps if the box will be moved full.
Which plywood thickness should I use?
3 mm is enough for packaged snacks and keeps the cut short; 4 mm feels sturdier if it will be handled daily.
Similar files
