VisualizationPeriod Product Organizer SVG, Two Row Tampon and Pad Tray, Laser Cut Bathroom Storage DXF
This is a two-row bathroom organizer for tampons, panty liners, pads and wet wipes, delivered as SVG and DXF with one file each for 3, 4, 5 and 6 mm plywood. It measures 360 × 180 × 110 mm (14.17 × 7.09 × 4.33 in) and is built from 9 tab-and-slot parts into five compartments: three in the taller back row and two wide ones in front, all behind a sloped front wall. You can download it free.
- Formats
- SVG, DXF
- Outer size (W × D × H)
- 360 × 180 × 110 mm (14.17 × 7.09 × 4.33 in)
- Parts
- 9
- Material thickness
- 3, 4, 5 or 6 mm plywood (a file for each)
- Layout size (3 mm file)
- 1,100 × 302 mm
- Cut length
- 6.79 m
- Est. time, 10 W diode (3 mm)
- 22 min 38 s
- Est. time, 40 W CO2 (3 mm)
- 9 min 26 s
- Layers
- CUT only, no engraving
Free account required to download
How to make it
- 01Measure your plywood with calipers, open the matching 3, 4, 5 or 6 mm file and test one tab in one slot on a scrap.
- 02Cut all 9 pieces; the 360 mm cross divider and the base are the longest, so place them first when you rearrange the layout.
- 03Fit the cross divider into the base, add the two tall back-row dividers and the single front-row divider, then wrap the back, sides and low front around them.
- 04Sand the top edges, seal the wood, and fill the back row with tampons, liners and pads and the front row with large pads and wipes.
How the two rows work
A full-length cross divider splits the box into a back row and a front row. The back row is cut into three bays by two short dividers; in the photo they hold upright tampons on the left, panty liners in the middle and regular pads on the right. The front row has just one divider, giving two wide bays that suit the bulkier items: a stack of overnight pads on one side and a soft pack of wipes with a flip lid on the other. Because the front wall is only 55 mm tall and the sides slope up to 110 mm, the back row sits higher and you can read every wrapper at a glance.
Thickness and laser time
Each of the four files has slots cut to its own plywood thickness, so pick the one that matches the sheet you actually measured. On 3 mm the cut is about 22 min 38 s with a 10 W diode, about 9 min 26 s with a 40 W CO2 and about 4 min 32 s with a 100 W CO2. Thicker 5 and 6 mm boards need several passes on a diode, or a CO2 tube. The 3 mm layout is 1100 × 302 mm; if your bed is around 400 mm, move the long base, back and cross divider onto one sheet and the remaining pieces onto another.
Gift and shop ideas
Stocked with a month of supplies, it makes a thoughtful gift for a teen's first period kit. Office and school restrooms also buy these as a free-supply station, and a sealed, oiled version sells well next to matching soap dish trays.
Questions about this file
What goes in the front bays versus the back bays?
The two front bays are wider, so they suit bulky overnight pads and a pack of wipes. The three narrower back bays work for tampons, panty liners and slim pads.
Can I cut this from acrylic or MDF?
MDF cuts like plywood but swells faster in a damp bathroom, so seal it well. Acrylic works if you use the file for its exact thickness, and it wipes clean easily.
Which thickness is best for a 10 W diode?
3 mm is the comfortable choice: one or two passes per line and the shortest cutting time. 4 mm is still fine with slower settings.
Do I need glue?
No, the tabs lock the parts together. Add a little wood glue along the base slots if the box will be carried around full.
Can I engrave a word or name on the front?
The file is cut lines only, but the front panel has room for a short engraved word such as a name or "supplies" if you add it in your laser software.
Similar files
