VisualizationPeriod Organizer SVG, Nine Compartment Tiered Bathroom Box, 3x3 Pad and Tampon Grid Laser Cut DXF
The largest box in this group: a nine-compartment period organizer laid out as a 3×3 grid in three tiers that step down toward the front. It is supplied as SVG and DXF for 3, 4, 5 and 6 mm plywood, measures 330 × 270 × 120 mm (12.99 × 10.63 × 4.72 in), and is made from 13 tab-and-slot parts with a sloped front. It is a free download.
- Formats
- SVG, DXF
- Outer size (W × D × H)
- 330 × 270 × 120 mm (12.99 × 10.63 × 4.72 in)
- Parts
- 13
- Material thickness
- 3, 4, 5 or 6 mm plywood (a file for each)
- Layout size (3 mm file)
- 1,231 × 506 mm
- Cut length
- 9.55 m
- Est. time, 10 W diode (3 mm)
- 31 min 49 s
- Est. time, 40 W CO2 (3 mm)
- 13 min 15 s
- Layers
- CUT only, no engraving
Free account required to download
How to make it
- 01Choose the plywood file, cut a test slot, and adjust your settings before committing the large layout.
- 02Cut the 13 parts over as many sheets as your bed requires, labelling each pair of cross dividers with its column.
- 03Fit the two long dividers into the base, add the three 99.7 mm cross dividers in the back row and the three 79.5 mm ones in front of them, then add back, sides and the low front.
- 04Sand all the stepped top edges, seal, and fill the nine bays with pads, tampons, liners and wipes.
Nine compartments in three steps
Two full-depth dividers make three columns, and six short cross dividers split each column into three. The cross dividers come in two heights, 99.7 mm and 79.5 mm, so the back row is tallest, the middle row a step lower and the front row lower again behind the 60 mm front. In the photo the back row holds three kinds of pads, the middle row pads, a line of tampons and liners, and the front row a stack of pads and two packs of wipes. With 270 mm of depth this is the deepest box here, and nine bays fit a full month for two people.
Laying out 13 parts
13 parts is the highest count in this category, and the cross dividers come in three slightly different lengths (111.9, 108.9 and 109.2 mm) because the columns are not identical. Mark each pair with its column as you take it off the bed. The 3 mm layout is 1230.7 mm long and wider than the other files, so most hobby lasers will need it split over three sheets. Cut time for the 3 mm file: about 31 min 49 s on a 10 W diode, about 13 min 15 s on a 40 W CO2, about 6 min 22 s on a 100 W CO2.
Ideas for selling
The grid looks orderly in photos and gives you something to say in the listing: nine bays, three tiers. Sell it as a shared-bathroom organizer for families, as a stocked restroom station for offices and coworking spaces, or as a vanity organizer for skincare samples. A matching smaller box from the same category makes a two-piece set.
Questions about this file
How are the nine compartments arranged?
Three columns by three rows, with the rows stepping down from the back toward the front so every bay is visible.
Why are there cross dividers of two heights?
The taller 99.7 mm set separates the back row from the middle one, and the 79.5 mm set separates the middle row from the front one, creating the tiers.
Will it fit on my laser in one go?
Probably not: the 3 mm layout is 1230.7 mm long. Rearrange the pieces over two or three sheets; nothing is larger than the 330 × 270 mm base.
Which thickness should I choose for 13 parts?
3 mm keeps the weight down and the cut time reasonable; 4 mm makes the many thin cross dividers stiffer.
Can I scale it down to a smaller grid?
You can shrink the panels in your editor, but every slot must stay equal to the material thickness for the tabs to lock.
Similar files
