VisualizationTiered Pad Tray SVG, Tampon and Liner Organizer Laser Cut File, Two Level Bathroom Shelf DXF
A two-level tray for pads, panty liners, tampons and wipes: a tall back row of three bays behind a full-height cross divider, and three shallow front bays for stacks of pads. Files come in SVG and DXF for 3, 4, 5 and 6 mm plywood; the outer size is 380 × 180 × 110 mm (14.96 × 7.09 × 4.33 in), with 10 tab-and-slot parts and a sloped front. It is free to download.
- Formats
- SVG, DXF
- Outer size (W × D × H)
- 380 × 180 × 110 mm (14.96 × 7.09 × 4.33 in)
- Parts
- 10
- Material thickness
- 3, 4, 5 or 6 mm plywood (a file for each)
- Layout size (3 mm file)
- 1,524 × 302 mm
- Cut length
- 7.58 m
- Est. time, 10 W diode (3 mm)
- 25 min 17 s
- Est. time, 40 W CO2 (3 mm)
- 10 min 32 s
- Layers
- CUT only, no engraving
Free account required to download
How to make it
- 01Open the file that matches your plywood thickness and cut one tab-and-slot test on an offcut.
- 02Cut the 10 parts and separate the two 55 mm front dividers from the two 110 mm back dividers.
- 03Stand the full-height cross divider in the base, add the tall dividers behind it and the low ones in front, then fit back, sides and the low front wall.
- 04Sand and seal, then lay pad stacks in the three front bays and fill the back row with liners, tampons and wipes.
Tall back row, shallow front bays
The cross divider here is the full 110 mm height, so it acts like a second back wall. Behind it, two full-height dividers make three bays: in the photo, rounded panty liner packs on the left, tampons in the middle and individually wrapped wipes on the right. In front of it, the floor runs the whole 380 mm length but only two low dividers (55 mm, the same as the front wall) separate three stacks of pads. The low front bays keep a week of pads lying flat and grab-ready, while the back row reads like a little shelf.
Choosing the thickness
3 mm is light and quick: about 25 min 17 s on a 10 W diode, about 10 min 32 s on a 40 W CO2, about 5 min 03 s on a 100 W CO2 for the 3 mm file. For a tray that sits on a busy counter, 4 mm gives a firmer feel without much extra weight. 5 and 6 mm need a CO2 or several diode passes. The 3 mm sheet is 1524 × 302 mm, so plan to move the 380 mm pieces onto their own sheet if your bed is shorter.
Selling ideas
This layout works for anyone who buys pads in bulk. Offer it stocked as a postpartum care tray, a gift for a daughter or sister, or a guest-bathroom basket. Selling it as a plain kit with clear instructions also works, since the tall cross divider makes assembly easy to follow.
Questions about this file
What fits in the low front bays?
Folded pads lying flat, three stacks side by side. The 55 mm dividers hold each stack in place without hiding the wrappers.
Can the back row hold standing tampons?
Yes. The back bays are 110 mm tall, enough for tampons standing upright or a box of applicator tampons with the lid off.
Can I make it in acrylic?
Frosted or white acrylic looks clean in a bathroom. Use the file for your exact sheet thickness and test one slot, as acrylic does not compress like wood.
How do I protect it from water near the basin?
Coat all faces with water-based polyurethane or oil and keep a gap from the tap so it never sits in a puddle.
Can I add a name on the front?
The front panel is only 55 mm tall, so a short engraved name or a small icon fits. Add it as an engrave layer in your software; the file itself is cut lines only.
Similar files
