VisualizationPeriod Supply Organizer SVG, Six Compartment Pad and Tampon Tray, Wooden Bathroom Box Laser DXF
This period supply organizer has six compartments in two rows of three for pads, tampons, liners and wipes. It is offered as SVG and DXF with separate files for 3, 4, 5 and 6 mm plywood, measures 360 × 200 × 120 mm (14.17 × 7.87 × 4.72 in), and is made of 10 tab-and-slot parts with a sloped front. The SVG and DXF set for this six-bay box is a free download.
- Formats
- SVG, DXF
- Outer size (W × D × H)
- 360 × 200 × 120 mm (14.17 × 7.87 × 4.72 in)
- Parts
- 10
- Material thickness
- 3, 4, 5 or 6 mm plywood (a file for each)
- Layout size (3 mm file)
- 1,154 × 332 mm
- Cut length
- 7.60 m
- Est. time, 10 W diode (3 mm)
- 25 min 20 s
- Est. time, 40 W CO2 (3 mm)
- 10 min 33 s
- Layers
- CUT only, no engraving
Free account required to download
How to make it
- 01Download the version for your sheet (3, 4, 5 or 6 mm) and cut a single slot on scrap to confirm the tab fit.
- 02Cut the 10 parts, then sort the four short dividers: the two 89.5 mm high ones belong in the front row, the two 120 mm ones in the back.
- 03Set the cross divider into the base, add the short dividers row by row, then fit the back, both sloped sides and the low front.
- 04Sand, seal with oil or lacquer, and assign one product to each of the six bays.
Six bays, one per product
A full-length cross divider makes two rows, and four short dividers split each row into three, so you get a neat 3×2 grid. The back row stands 120 mm tall and the front edge only 60 mm. In the photo the back row holds day pads, upright tampons and a refill pack of wipes; the front row holds two kinds of pads or liners. Six bays let you keep each absorbency apart, which helps when more than one person shares the bathroom.
Cutting on a smaller bed
The 3 mm layout measures 1154 × 332 mm. Few hobby lasers take that in one go, so rearrange the pieces: the base, back, front and cross divider (all 360 mm long) on one sheet, and the sides and four 101.5 mm dividers on another. Cutting time for the 3 mm file is about 25 min 20 s on a 10 W diode, about 10 min 33 s on a 40 W CO2, and about 5 min 04 s on a 100 W CO2. Two of the short dividers are lower (89.5 mm) and two are full height (120 mm); the lower pair goes in the front row.
Make it a set
The grid looks tidy on an open shelf, so it pairs well with matching pieces: a tissue box cover, a cotton swab jar stand, or a narrow tray for hair ties. Sell the set finished in clear oil, or offer a stocked version for bridal party bathrooms and salons.
Questions about this file
How big are the six compartments?
Each bay takes about a third of the 360 mm length and half of the 200 mm depth. Stacks of wrapped pads, a row of tampons and a refill pack of wipes fit, as in the photo.
Can the six-bay grid be scaled down to fit a drawer?
You can shrink the outline, but slots must stay at the plywood thickness. Scale the panels, then redraw or reset the slot widths to 3, 4, 5 or 6 mm.
Should I glue the dividers?
Not necessary. A dab of wood glue on the base slots is enough if you want the grid to stay rigid while being carried.
What finish holds up in a bathroom?
Water-based polyurethane or a hardwood oil, two coats, with edges sanded first so the finish soaks in evenly.
Can I engrave labels on the short dividers?
Yes, words such as "light", "heavy" or "night" fit on the four short dividers. Add them as an engrave layer before cutting, since the file itself has cut lines only.
Similar files
