VisualizationStepped Skincare Organizer SVG, Three Row Tiered Bathroom Shelf Laser Cut, Serum Bottle Display DXF
A three-row stepped skincare organizer in which two full-width cross dividers form rows that rise toward the back, available as SVG and DXF with separate files for 3, 4, 5 and 6 mm plywood. It is 300 × 230 × 100 mm (11.81 × 9.06 × 3.94 in), made of 7 pieces, with a sloped front 55 mm high. It assembles with tabs and slots and is offered as a free download.
- Formats
- SVG, DXF
- Outer size (W × D × H)
- 300 × 230 × 100 mm (11.81 × 9.06 × 3.94 in)
- Parts
- 7
- Material thickness
- 3, 4, 5 or 6 mm plywood (a file for each)
- Layout size (3 mm file)
- 1,080 × 342 mm
- Cut length
- 6.14 m
- Est. time, 10 W diode (3 mm)
- 20 min 27 s
- Est. time, 40 W CO2 (3 mm)
- 8 min 31 s
- Layers
- CUT only, no engraving
Free account required to download
How to make it
- 01Download the file for your plywood thickness and cut a test slot to check the cross dividers will sit tight.
- 02Cut the 7 parts: front, back, two sloped sides, base and the two full-width cross dividers of different heights.
- 03Place the lower cross divider toward the front and the taller one behind it in the base, then add the sides, the back and the front.
- 04Seal with varnish or oil and fill the rows from back to front: tallest items at the back, jars and pads at the front.
Rows instead of cells
This box has no front-to-back dividers at all. Two cross dividers span the full 300 mm width, a lower one and a taller one, so the inside becomes three long rows that step up toward the 100 mm back wall, like seats in a theatre. Each row is open from side to side.
The photo, taken on a counter in a terracotta-tiled bathroom, shows how that works: sheet masks stand in the back row, three dropper serums line up in the middle row, and the front row holds a stack of cotton pads and two cream jars. Every product is visible from the front, and the rows take any mix of widths.
Choosing the thickness and cutting
There are separate SVG and DXF files for 3, 4, 5 and 6 mm plywood. Since the long cross dividers carry no other parts, 3 mm is stiff enough here; 4 mm gives a more solid feel for glass bottles. The 3 mm layout is 1080 × 342 mm, so on a smaller bed cut the base and one cross divider on a second sheet. The 3 mm file takes about 20 min 27 s on a 10 W diode, about 8 min 31 s on a 40 W CO2 and about 4 min 05 s on a 100 W CO2. Thicker files need a CO2 or several diode passes.
Assembly and finishing
Slot both cross dividers into the base, the lower one at the front, then fit the sides, which hold the divider ends, and add the back and front. Glue is optional. For a bathroom, seal every face with water-based varnish.
This stepped layout also works as a small shop display for handmade soaps or serums at a market stall.
Questions about this file
What is the advantage of rows over cells?
Open rows take bottles and jars of any width, and the rising heights let you see every item from the front.
Can it be used as a shop display?
Yes, the stepped rows show small bottles, soaps or candles well on a market table.
Is it waterproof enough for a bathroom?
Only after sealing. Use water-based polyurethane or marine varnish on all surfaces and edges.
Can I add dividers inside a row?
You can draw short dividers and add slots to the base and cross dividers, keeping the slot width equal to your sheet thickness.
Does it work in acrylic?
Yes, cut the file that matches your acrylic thickness and test a slot first; clear acrylic makes a nice retail display.
Similar files
