VisualizationSquare Makeup Organizer SVG, Four Cell Cosmetic Box Laser Cut File, Small Vanity Caddy Wooden DXF
A free laser cut square makeup organizer, 220 × 220 × 90 mm (8.66 × 8.66 × 3.54 in), divided into four cells in a 2 × 2 grid. The download includes SVG and DXF files for 3, 4, 5 and 6 mm plywood; its 8 pieces lock together with tabs and slots, and the sides slope from a 90 mm back to a 54 mm front. You can download it free of charge.
- Formats
- SVG, DXF
- Outer size (W × D × H)
- 220 × 220 × 90 mm (8.66 × 8.66 × 3.54 in)
- Parts
- 8
- Material thickness
- 3, 4, 5 or 6 mm plywood (a file for each)
- Layout size (3 mm file)
- 900 × 322 mm
- Cut length
- 5.21 m
- Est. time, 10 W diode (3 mm)
- 17 min 22 s
- Est. time, 40 W CO2 (3 mm)
- 7 min 14 s
- Layers
- CUT only, no engraving
Free account required to download
How to make it
- 01Pick the 3, 4, 5 or 6 mm file and cut a test slot to see whether the 220 mm square needs a kerf tweak.
- 02Cut the base on its own if your bed is small, then the walls, cross divider and the two short dividers from the 900 × 322 mm layout.
- 03Join each short divider to the cross divider, push the grid into the base, then fit back, sides and the 54 mm front.
- 04Sand and oil the box, then fill the back cells with brushes and lipsticks and the front cells with compacts and palettes.
A small square box for a crowded vanity
At 22 cm on each side this organizer takes up less width than a standard tray and fits into a corner next to a mirror. One cross divider, 71.7 mm tall, separates a back row from a front row, and a short divider splits each row in half, giving four cells of almost the same size. The photo shows brushes and lipsticks in the two back cells and powder compacts with an eyeshadow palette in the front pair.
Material and cutting
The 3 mm layout is 900 × 322 mm. Because the square base is 220 mm, even a small laser bed can cut it on its own; the walls and dividers then go on a second sheet. Expected times for the 3 mm file are about 17 min 22 s on a 10 W diode, about 7 min 14 s on a 40 W CO2 and about 3 min 28 s on a 100 W CO2. Choose 4 mm if you want a firmer box but still cut on a diode in a few passes; save 5–6 mm for a CO2.
Assembly order and set ideas
The two short dividers are not the same length, so match each one to its row before you start. Slot them onto the cross divider, set the cross into the base, then add the back, the two sides and the front. Light sanding removes the brown edge; clear oil gives the birch a warmer tone.
To turn it into a set:
- Cut two and place them side by side for a his-and-hers dresser
- Pair it with a narrow brush caddy for a matching vanity set
- Pack it with mini lipsticks as a teacher or coworker gift
Questions about this file
Is this square box big enough for a full makeup routine?
It holds an everyday set: a few brushes, three or four lipsticks, a couple of compacts and one palette. For a larger collection, cut two and place them together.
Why are the two short dividers different lengths?
One measures 111.5 mm and the other 108.5 mm because the back row is 3 mm deeper than the front row. Check the length before pushing each one into place.
Can I resize it to 30 cm square?
You can scale the outline, but keep slot and tab widths equal to your sheet thickness. Most laser users redraw the slots after scaling rather than scaling them.
Will 3 mm MDF work?
Yes, the 3 mm file cuts MDF fine and the box will be slightly heavier. Seal or paint MDF, because raw edges absorb moisture quickly.
Can I add a monogram?
The 220 mm front is a good spot for initials. Add your own engrave layer, since the file itself contains only cut lines.
Similar files
