VisualizationSquare Pantry Tray SVG, Lazy Susan Style Kitchen Organizer DXF, Laser Cut Spice Jar and Tea Box, Wooden Bin
This laser cut file makes a square pantry storage tray with straight 100 mm walls and five compartments: a full-width back row for spice jars, a middle row in three bays and a full-width front row. It includes SVG and DXF files for 3, 4, 5 and 6 mm plywood, an outer size of 300 × 300 × 100 mm (11.81 × 11.81 × 3.94 in) and 9 pieces joined with tabs and slots. This square tray is a free download.
- Formats
- SVG, DXF
- Outer size (W × D × H)
- 300 × 300 × 100 mm (11.81 × 11.81 × 3.94 in)
- Parts
- 9
- Material thickness
- 3, 4, 5 or 6 mm plywood (a file for each)
- Layout size (3 mm file)
- 1,220 × 412 mm
- Cut length
- 8.17 m
- Est. time, 10 W diode (3 mm)
- 27 min 14 s
- Est. time, 40 W CO2 (3 mm)
- 11 min 21 s
- Layers
- CUT only, no engraving
Free account required to download
How to make it
- 01Download the version for your plywood and cut a test slot to make sure the tabs seat firmly.
- 02Cut the nine pieces, splitting the layout if needed: four straight walls, the square base, two full-width cross dividers and two short dividers.
- 03Build the walls around the base, fit both cross dividers, then add the two short dividers in the middle row.
- 04Sand, finish with lacquer or oil, and put spice jars in the back row, tea and napkins in the middle and twine in the front strip.
Three rows in a square
This is the only square, straight-walled box in the pantry set. Two full-width cross dividers split it into three rows, and two short dividers split the middle row into three bays, giving five compartments. In the photo the back row is a line of four spice jars. The middle row holds tea bags in three colors, a stack of white napkins, and a pack of toothpicks with paper baking cups. The front row is a long open strip for a roll of baker's twine and a few paper doilies. All walls are 100 mm high, so nothing slides out at the front.
Bed size and cut time
At 300 × 300 mm the base is the largest single piece in this set, and the 3 mm layout is 1220 × 412 mm, wider than many desktop machines. Split the pieces onto two or three sheets and check that the 300 mm parts fit your bed. For the 3 mm file it takes about 27 min 14 s on a 10 W diode, about 11 min 21 s on a 40 W CO2 and about 5 min 27 s on a 100 W CO2. A diode does 3 mm in one or two passes; for 5 and 6 mm plan for a CO2 or many passes.
Finishing and ideas
Sand the edges and apply a clear lacquer or a food-safe oil so the tray can be wiped. Glue is optional; tab-and-slot joints hold, and wood glue makes it permanent.
Selling ideas: a square tray fits on a lazy Susan, so pair the two in a listing; sell it as a deep cabinet organizer; or fill it with jars and tea as a housewarming gift.
Questions about this file
Will it sit on a lazy Susan turntable?
The footprint is 300 × 300 mm, so it fits a turntable of about that diameter or larger. Measure yours first.
How many spice jars fit in the back row?
Four small round jars stand in a line in the photo. Larger jars will fit fewer.
My laser bed is small. Can I still cut it?
Yes, as long as the 300 mm square base fits your bed. Spread the other pieces across extra sheets.
Can I scale it down to 250 mm?
Scale the drawing, then reset all slots to your real plywood thickness, because scaling shrinks them and the tabs will no longer fit.
What finish works for a cabinet tray?
Clear lacquer or a hard wax oil protects the plywood from spilled spices and makes the tray easy to wipe. Waterproofing is not needed inside a dry cupboard.
Similar files
