VisualizationBaking Organizer SVG, Eight Section Sprinkles and Sachet Box Laser Cut File, Cake Decorating Supply Tray DXF
A low eight-section baking organizer laid out as four columns and two rows, for baking sachets, four sprinkle jars, measuring cups and pastry brushes. The download includes SVG and DXF files for 3, 4, 5 and 6 mm plywood; the box is 320 × 220 × 80 mm (12.6 × 8.66 × 3.15 in), has 12 pieces and a front that slopes down to 40 mm, and assembles with tabs and slots. Free to download.
- Formats
- SVG, DXF
- Outer size (W × D × H)
- 320 × 220 × 80 mm (12.60 × 8.66 × 3.15 in)
- Parts
- 12
- Material thickness
- 3, 4, 5 or 6 mm plywood (a file for each)
- Layout size (3 mm file)
- 1,253 × 376 mm
- Cut length
- 7.90 m
- Est. time, 10 W diode (3 mm)
- 26 min 21 s
- Est. time, 40 W CO2 (3 mm)
- 10 min 59 s
- Layers
- CUT only, no engraving
Free account required to download
How to make it
- 01Choose the 3, 4, 5 or 6 mm file and check one tab in a test slot before cutting the full sheet.
- 02Cut the 12 parts and keep the four short cross dividers in cutting order, since their lengths differ slightly.
- 03Assemble the outer box, set the three long dividers, then press one cross divider into each of the four columns.
- 04Sand, seal, and fill the eight sections with jars, sachet stacks and tools.
Eight small sections
Three long dividers make four columns and each column has its own short cross divider, so you get a 4 × 2 grid of eight sections, each about 75 mm wide. That is the right size for one jar, one stack of sachets or one set of tools, which keeps a decorating kit sorted without any guessing.
In the photo the back row holds baking powder sachets, vanilla sugar sachets, a jar of rainbow nonpareils and a jar of pink hearts. The front row holds nested measuring cups, two silicone pastry brushes, a jar of star confetti and a jar of chocolate pearls. Four jars on the right, tools and sachets on the left: an easy order to keep.
The walls are low, 80 mm at the back and 40 mm at the front, so the tray suits a shelf with little headroom.
Cutting the 12 parts
Front, back, two sides, base, three full-depth dividers and four short cross dividers. The cross dividers differ by a few tenths of a millimetre, so keep them in the order they were cut. The 3 mm layout is 1252.6 × 375.72 mm; split it into two or three jobs on a hobby-size bed.
The 3 mm file takes about 26 min 21 s on a 10 W diode, about 10 min 59 s on a 40 W CO2 and about 5 min 16 s on a 100 W CO2. Thicker plywood means extra passes on a diode.
Thickness and gifts
3 or 4 mm suits the low walls and the light contents. Seal with a clear water-based finish.
Set up as a cupcake decorating kit, with four sprinkle jars, liners and a brush, it makes a gift that is ready to use. Bakeries that sell decorating classes can hand one to each student.
Questions about this file
What fits in one section?
Each section is about 75 mm wide: one 200 ml sprinkle jar, a stack of baking sachets or a pair of pastry brushes.
Is it low enough for a pantry shelf?
Yes, the back is 80 mm (3.15 in) tall, so it slides under most shelves and still leaves room to lift jars out.
Can I cut it from acrylic?
Yes, use the file for your acrylic thickness; frosted or pastel acrylic suits a baking theme.
Do the cross dividers need glue?
No, they wedge between the long dividers. Glue them only if you will carry the box around often.
Can I add labels to each section?
Add short engraved words on the back wall or divider tops in your laser software; the file contains cut lines only.
Similar files
