VisualizationSerum Bottle Organizer SVG, Skincare Grid Tray Laser Cut File, Seven Compartment Vanity Box DXF
A skincare organizer combining one wide full-depth bay with a six-cell grid for serum bottles, offered as SVG and DXF with separate files for 3, 4, 5 and 6 mm plywood. Its outer size is 360 × 210 × 100 mm (14.17 × 8.27 × 3.94 in), it has 11 pieces and seven compartments, and the sides slope to a 60 mm front. It goes together with tabs and slots; the download is free.
- Formats
- SVG, DXF
- Outer size (W × D × H)
- 360 × 210 × 100 mm (14.17 × 8.27 × 3.94 in)
- Parts
- 11
- Material thickness
- 3, 4, 5 or 6 mm plywood (a file for each)
- Layout size (3 mm file)
- 1,256 × 322 mm
- Cut length
- 7.94 m
- Est. time, 10 W diode (3 mm)
- 26 min 29 s
- Est. time, 40 W CO2 (3 mm)
- 11 min 02 s
- Layers
- CUT only, no engraving
Free account required to download
How to make it
- 01Choose the SVG or DXF for your plywood thickness and cut a test slot before nesting the parts on your sheets.
- 02Cut the 11 parts: front, back, two sloped sides, base, the long bay divider, the cross divider and four short grid dividers.
- 03Fix the bay divider in the base, build the grid with the cross divider and short dividers, then add the back, sides and 60 mm front.
- 04Sand, finish, and put one serum in each back cell, pads and small jars in the front cells and masks with jars in the wide bay.
Two zones in one box
The left third of this organizer is a single open bay that runs from the front wall to the back, wide enough for sheet masks standing upright with two cream jars in front. The right two-thirds is a grid: a cross divider separates a taller back row from a lower front row, and short dividers cut each row into three cells. With the bay that makes seven compartments.
In the photo, on a white vanity against a pale blue wall, the three back cells each hold one dropper serum: clear, amber and frosted. The front cells have two stacks of cotton pads and a small cream jar. Dropper bottles in separate cells do not knock into each other when you lift one out, which matters with glass.
Laser bed and timing
The 3 mm file is laid out on a 1256.2 × 322 mm sheet. Most hobby machines will need two sheets: the 360 mm front, back and base on one, the sides and the grid parts on the other. Expect about 26 min 29 s on a 10 W diode, about 11 min 02 s on a 40 W CO2 and about 5 min 18 s on a 100 W CO2, all for the 3 mm file. On a diode, 5 and 6 mm need several passes.
Assembly
Put the full-height divider that separates the bay into the base, then the two tall back dividers, the cross divider and the two low front dividers. Finish with the back, the sides and the front. A drop of wood glue in each grid slot stiffens the small cells.
For selling, this layout suits people who collect serums; mention in the listing that each bottle gets its own cell.
Questions about this file
How many serum bottles does the grid hold?
Three back cells take one dropper bottle each, and the three front cells can take three more short bottles, jars or pad stacks.
Which side is the wide bay on?
On the left as cut; mirror the parts in your software if you want it on the right.
What material works besides plywood?
MDF and acrylic both work if you use the file that matches their thickness and test one slot first.
How should I protect it from serum drips?
Oil-based serums mark bare wood, so seal the inside with two coats of clear lacquer and wipe drips promptly.
Can I resize the grid cells?
You can move the dividers in your design software; keep each slot as wide as your sheet thickness.
Similar files
