VisualizationPad and Wipes Organizer SVG, Feminine Hygiene Box with Tampon Bay, Wooden Bathroom Organizer DXF
A six-compartment organizer with a full-depth bay for a large pack of wipes, three pad slots across the back and two front bays for liners and tampons. Delivered as SVG and DXF for 3, 4, 5 and 6 mm plywood; it measures 360 × 200 × 110 mm (14.17 × 7.87 × 4.33 in), has 10 tab-and-slot parts and a sloped front. Free to download.
- Formats
- SVG, DXF
- Outer size (W × D × H)
- 360 × 200 × 110 mm (14.17 × 7.87 × 4.33 in)
- Parts
- 10
- Material thickness
- 3, 4, 5 or 6 mm plywood (a file for each)
- Layout size (3 mm file)
- 1,144 × 322 mm
- Cut length
- 7.47 m
- Est. time, 10 W diode (3 mm)
- 24 min 54 s
- Est. time, 40 W CO2 (3 mm)
- 10 min 23 s
- Layers
- CUT only, no engraving
Free account required to download
How to make it
- 01Choose the 3, 4, 5 or 6 mm file and test a single slot with a tab before cutting the full layout.
- 02Cut all 10 parts and sort the low 82.1 mm divider from the two tall 110 mm dividers.
- 03Fit the full-depth divider into the base, add the 251.7 mm cross divider, slot the two tall dividers behind it and the low one in front, then attach back, sides and front.
- 04Sand and seal, put a large pack of wipes in the right bay, pads in the three back slots and liners and tampons in front.
Full-depth wipes bay
The right end of the box is one open bay that runs the full 200 mm depth, big enough for a family-size pack of wet wipes with a flip lid lying flat. To the left of it, a cross divider (251.7 mm long) splits the rest into rows. The back row has three pad slots made by two tall dividers, and in the photo each holds a stack of pink pads. The front row is lower and has one short divider: patterned liners on the left, tampons lying in a row on the right. The front wall is 55 mm and the back 110 mm.
Building order
There are 10 pieces: front, back, two sloped sides, base, one full-depth divider, the cross divider, one low divider (101.5 × 82.1 mm) and two tall dividers (101.5 × 110 mm). Start with the full-depth divider, then the cross divider, then the small dividers on each side of it. The 3 mm file cuts in about 24 min 54 s on a 10 W diode, about 10 min 23 s on a 40 W CO2 and about 4 min 59 s on a 100 W CO2. Its layout is 1144.2 × 322 mm; spread it over two or three sheets on a smaller laser.
Shop ideas
The large wipes bay is what sets this box apart, so mention it in your listing title. It works as a changing-table or postpartum tray as well as a period box. Sell it oiled for home bathrooms, or finished in white for spas, and offer engraving of a short label on the front panel as a paid extra.
Questions about this file
Will a large pack of wet wipes fit?
The right bay is open for the whole 200 mm depth, so a family-size pack with a flip lid lies flat inside.
Can I use it as a postpartum or changing tray?
Yes, the same layout holds maternity pads, wipes and small creams. Just seal it well for easy cleaning.
Which material besides plywood works?
MDF and acrylic both cut cleanly. Use the file for the exact sheet thickness, and seal MDF against moisture.
What thickness is easiest on a diode laser?
3 mm. It cuts in one or two passes and keeps the box light; 5 and 6 mm are better left to a CO2.
Do the dividers need glue?
They lock in their slots. A drop of wood glue in the base slots is optional for a permanent build.
Similar files
