VisualizationHair Tie Organizer SVG, Seven Section Claw Clip Box, Laser Cut Hair Accessory Storage With Grid DXF
A seven-section plywood organizer for hair ties, clips and headbands, 380 × 220 × 80 mm (14.96 × 8.66 × 3.15 in): one large bay on the left and a grid of six pockets on the right, with sides sloping to a 40 mm front. The free download has SVG and DXF for 3, 4, 5 and 6 mm plywood; 11 parts lock with tabs and slots.
- Formats
- SVG, DXF
- Outer size (W × D × H)
- 380 × 220 × 80 mm (14.96 × 8.66 × 3.15 in)
- Parts
- 11
- Material thickness
- 3, 4, 5 or 6 mm plywood (a file for each)
- Layout size (3 mm file)
- 1,319 × 312 mm
- Cut length
- 7.82 m
- Est. time, 10 W diode (3 mm)
- 26 min 05 s
- Est. time, 40 W CO2 (3 mm)
- 10 min 52 s
- Layers
- CUT only, no engraving
Free account required to download
How to make it
- 01Use the file for your plywood thickness; test one grid divider slot on scrap since the grid has the tightest fit.
- 02Cut the 11 parts over two or three sheets, keeping the seven dividers together.
- 03Assemble base, sides and back, add the long divider, then the short cross divider, the two back and two front grid dividers, and the front.
- 04Sand the grid rims, apply lacquer and give each of the six small pockets one type of tie or clip.
One bay and a six-pocket grid
One long divider sets aside the left third for bulky things: two padded headbands and a pair of satin scrunchies. To the right, a cross divider and four short dividers make a grid of three across and two deep. That grid is for small items that need their own spot: two claw clips and a bundle of gold bobby pins at the back, then a clear claw clip, spiral hair ties and a pink comb in front. Spiral ties and mini clips tend to scatter in a drawer, so a pocket each makes a real difference.
With 380 mm of width this is one of the larger boxes in the set, yet only 80 mm tall, and the 40 mm front keeps the grid easy to see into.
Cutting it on your machine
The 3 mm layout measures 1319.2 × 312 mm, so it needs splitting on nearly every hobby laser. Group the base on one sheet, the walls on a second and the seven dividers on a third. The 3 mm file runs about 26 min 05 s on a 10 W diode, about 10 min 52 s on a 40 W CO2 and about 5 min 13 s on a 100 W CO2. For 5 or 6 mm plywood a CO2 makes far cleaner dividers than repeated diode passes.
Assembly: shell first, then the long divider, the short cross divider in the right part, two back dividers, two front dividers, and the low front.
Hair tie bar and other ideas
- A hair tie bar: fill each pocket with a different colour of spiral ties and sell it as a gift set.
- A salon station tray for clips and ties.
- A vanity set with a matching makeup tray in the same finish.
Questions about this file
What goes in the six small pockets?
Spiral hair ties, mini and medium claw clips, bobby pins and a short comb all fit. Larger clips stand upright in the back row.
Is the left bay big enough for headbands?
Yes, it runs the full depth of the box and holds two padded headbands with scrunchies in front of them.
Which plywood thickness do you recommend?
3 mm for a neat, light grid and fast cutting; 4 mm if you want the dividers stiffer.
Can I make it in acrylic for a salon?
Yes, cut the version matching your acrylic thickness. Frosted acrylic hides fingerprints better than clear.
Do I need glue for the grid?
The grid dividers interlock and hold on their own. A drop of glue helps only if the box will be moved a lot.
Similar files
