VisualizationTampon and Pad Organizer SVG, Four Bay Bathroom Counter Box, Wooden Period Holder Laser Cut DXF
A four-bay tampon and pad organizer with all compartments side by side in one row and a sloped front. Files are SVG and DXF, one per plywood thickness (3, 4, 5 and 6 mm); the box measures 380 × 180 × 120 mm (14.96 × 7.09 × 4.72 in) and assembles from 8 tab-and-slot parts. The eight files are free to download.
- Formats
- SVG, DXF
- Outer size (W × D × H)
- 380 × 180 × 120 mm (14.96 × 7.09 × 4.72 in)
- Parts
- 8
- Material thickness
- 3, 4, 5 or 6 mm plywood (a file for each)
- Layout size (3 mm file)
- 1,524 × 312 mm
- Cut length
- 6.58 m
- Est. time, 10 W diode (3 mm)
- 21 min 55 s
- Est. time, 40 W CO2 (3 mm)
- 9 min 08 s
- Layers
- CUT only, no engraving
Free account required to download
How to make it
- 01Download the file for 3, 4, 5 or 6 mm plywood and cut a tab into one slot as a fit test.
- 02Cut the 8 parts; the three dividers are the same size and can go in any slot.
- 03Set the three dividers into the base, add the tall back, slide on both sloped sides, then fit the low front.
- 04Sand, seal, and fill the four bays with tampons, day pads, night pads and wipes.
Four bays in one row
Three full-depth dividers split the box into four bays from left to right, and every bay is open front to back. In the photo the leftmost bay is the narrowest and holds tampons standing on end; next come pink day pads, then white night pads, and finally a pack of wipes on the right. The 120 mm back is the taller version in this group, so tall stacks of pads stay upright, while the 66 mm front keeps the bays easy to reach into.
Cutting time and passes
All three dividers are identical 180 × 120 mm panels, which keeps sorting easy. For the 3 mm file, plan about 21 min 55 s on a 10 W diode, about 9 min 08 s on a 40 W CO2 and about 4 min 23 s on a 100 W CO2. A diode cuts 3 mm plywood in one or two passes; for 5 or 6 mm, either use a CO2 or run several passes with good air assist and check that the slots go all the way through. The 3 mm layout is 1524 × 312 mm, so split the 380 mm panels and the smaller pieces across sheets that suit your bed.
Gift ideas
A one-row layout makes it simple to label each bay, which helps younger users. Fill it as a first period kit for a pre-teen, make a matching one for the school nurse's office, or bundle it with a small trash bin caddy for a guest bathroom. Engraving a name or a short word on the front is easy to add in your software.
Questions about this file
Are the bays all the same width?
No. The leftmost bay is narrower, sized for tampons, while the other three take pads and a pack of wipes.
How tall can a pad stack be?
The back wall is 120 mm, so stacks of folded pads stand upright without tipping over the top.
Can I resize the box?
Change the panel sizes, not the slot widths. Slots must stay equal to the plywood thickness for the tabs to lock.
Does a four-bay counter box need waterproofing?
For a bathroom counter, yes: two coats of clear lacquer or a hardwood oil on all faces stop the plywood from swelling.
Is a lid included?
No, it is an open box with four bays. For a closed version, place it inside a cabinet.
Similar files
