DXF / SVG / GeneratorsFiles. Tools. Possibilities.
EN
Saved0
Open birch plywood organizer with six bays on a pink kitchen counter, oil and soy sauce bottles in the back row and groups of small hot sauce and dressing bottles in front.Visualization
DW-106012 · UPDATED 11/16/2026

Hot Sauce Organizer SVG, Sauce Bottle Holder Laser Cut File, Six Compartment Condiment Box DXF

A free laser cut file for an open hot sauce and condiment organizer with six bays in two rows of three, made for mini sauce bottles in front and oil bottles behind. The SVG and DXF come in separate versions for 3, 4, 5 and 6 mm plywood, and the 8 pieces slot together with tabs and slots into a 290 × 180 × 90 mm (11.42 × 7.09 × 3.54 in) box.

Author
DXF World · 281 files
Formats
SVG, DXF
Outer size (W × D × H)
290 × 180 × 90 mm (11.42 × 7.09 × 3.54 in)
Parts
8
Material thickness
3, 4, 5 or 6 mm plywood (a file for each)
Layout size (3 mm file)
960 × 282 mm
Cut length
8.09 m
Est. time, 10 W diode (3 mm)
26 min 59 s
Est. time, 40 W CO2 (3 mm)
11 min 14 s
Layers
CUT only, no engraving

Free account required to download

How to make it

  1. 01Choose the folder for your plywood and cut one cross-slot joint on scrap to check the dividers interlock snugly.
  2. 02Cut the 8 pieces: four walls, base, the long divider and the two short dividers.
  3. 03Set the four walls on the base, then lock the two short dividers onto the long one and lower the grid into the box.
  4. 04Sand, seal with hardwax oil and line the front bays with mini sauces and the back bays with taller oils.

Built around mini bottles

Hot sauce collections grow fast and the bottles are small, so loose ones tip over and get lost at the back of a cupboard. This open box gives them a grid: one long divider runs the full 290 mm and two full-depth dividers cross it, making six bays of equal height. In the photo the back bays hold olive oil, soy sauce and a light oil, and the front bays are packed with little bottles of chilli, peri-peri, ranch and mustard dressing, three to a group. All walls and dividers stand 90 mm tall, so a 100 ml bottle is held almost to the shoulder.

Laser settings and sheet layout

On the 3 mm file a 10 W diode needs about 26 min 59 s, a 40 W CO2 about 11 min 14 s and a 100 W CO2 about 5 min 24 s. Use the 3 or 4 mm version on a diode; 5 or 6 mm needs more passes than most people want, so cut those on a CO2. The parts fill a 960 × 282 mm layout: put the 290 × 180 mm base on one sheet and spread the walls and dividers over another one or two. The dividers slot into each other like an egg crate, so lay them in after the walls stand on the base. Glue is optional.

Gifts for chilli fans

A box like this filled with six craft hot sauces is an easy Father's Day or birthday present. Sauce makers can use it as a counter display at markets, and the 180 mm depth leaves space for a small price card at the front of each bay.

Questions about this file

How many hot sauce bottles does it hold?

With mini 50 to 100 ml bottles you can fit two or three per bay, so 12 to 18 in total. Full 150 ml woozy bottles go one or two per bay.

Are the front bays lower than the back ones?

No, all the dividers are 90 mm high, the same as the walls. The two rows simply let you keep tall and short bottles apart.

Can I make it in black acrylic for a shop counter?

Yes, use the 3 mm file on a CO2 laser and check the slot fit first, because acrylic sheet thickness varies. It looks sharp and wipes clean.

Why not just scale the file to my bottle size?

Scaling also widens or narrows the slots, so they stop matching your plywood. Change the panel sizes in your editor and keep the slots at material thickness.

Will chilli oil stain the wood?

Raw plywood absorbs oil and keeps the stain. Two coats of lacquer or a hardwax oil on the inside stop that.

Similar files