VisualizationPantry Snack Organizer SVG, 7 Compartment Snack Tray Laser Cut File, Wooden Snack Display Box, Party Snack DXF
The widest tray in the snack set, with 7 compartments: four cells along the back and three larger ones in front, for bars, nuts, dried fruit and crackers. It is supplied as SVG and DXF with separate files for 3, 4, 5 and 6 mm plywood, measures 360 × 240 × 90 mm (14.17 × 9.45 × 3.54 in), and is cut from 11 pieces. The sides slope to a 45 mm front, it assembles with tabs and slots, and the file is free to download.
- Formats
- SVG, DXF
- Outer size (W × D × H)
- 360 × 240 × 90 mm (14.17 × 9.45 × 3.54 in)
- Parts
- 11
- Material thickness
- 3, 4, 5 or 6 mm plywood (a file for each)
- Layout size (3 mm file)
- 1,371 × 342 mm
- Cut length
- 8.31 m
- Est. time, 10 W diode (3 mm)
- 27 min 42 s
- Est. time, 40 W CO2 (3 mm)
- 11 min 33 s
- Layers
- CUT only, no engraving
Free account required to download
How to make it
- 01Download the file for your plywood and test-fit one back divider in a scrap slot.
- 02Cut the eleven parts, spreading the 1371 mm layout across several sheets on a desktop laser.
- 03Build the shell, add the cross divider, slide in the three tall back dividers and the two short front ones, then fit the front.
- 04Sand, oil or lacquer, and arrange seven snack types, slim packs in the back row and chunkier ones in front.
Seven compartments across 360 mm
A cross divider about 65 mm tall separates the rows. Behind it, three full-height dividers make four back cells about 85 mm wide; in front, two short dividers make three cells about 115 mm wide. The back row in our photo holds granola bars, nut packs, dried apricots and cranberries, and crackers. The front row takes chocolate bars, more nuts, and a mix of dried fruit with cracker squares. With seven kinds of snack visible at once, it suits a family pantry shelf, an office kitchen or a party table.
Laser bed and cutting time
At 360 mm wide, this has the longest layout in the snack group: about 1371 × 342 mm for 3 mm. Most diode lasers will need it split over three or four sheets. The 3 mm file takes about 27 min 42 s on a 10 W diode, about 11 min 33 s on a 40 W CO2 and about 5 min 32 s on a 100 W CO2. There are eleven parts in total; keep the two short front dividers apart from the three taller back ones. A diode cuts 3 mm in one or two passes, while 5 and 6 mm need a CO2 or extra passes.
Assemble base, sides and back; fit the cross divider; add the three back dividers; then the two front dividers; then the 45 mm front. Dry joints hold, and a little wood glue makes it rigid enough to carry full.
Finishing and selling ideas
Sand every cell edge and finish with oil or clear lacquer. Market it as a snack display for offices, holiday rentals or kids' parties. A company logo engraved on the front panel turns it into a corporate gift, and a filled version sells well before the holidays.
Questions about this file
How big are the cells?
The four back cells are about 85 mm wide and the three front cells about 115 mm, so bars and single packs go in back and wider packs in front.
Will it fit my laser bed?
The 3 mm layout is about 1371 mm long; on a 400 mm class laser, rearrange the parts onto three or four sheets before cutting.
Can I make it smaller?
Shrink the outline in your software but keep slot widths equal to the plywood you cut, otherwise the dividers fall out.
Is MDF an option for this tray?
Yes. MDF gives a smooth surface for paint; seal all faces so humidity does not swell the edges.
How do I add a logo?
Place your logo or name on the 360 mm front panel as an engraving layer before cutting; the download contains cut lines only.
Similar files
