VisualizationPeriod Supply Tray SVG, Seven Bay Pad Tampon and Wipes Organizer, Bathroom Drawer Insert Laser DXF
A seven-bay period supply tray with a gentle slope: one wide pad bay on the left and three columns, each split front and back, for liners, tampons and wipes. Files come in SVG and DXF for 3, 4, 5 and 6 mm plywood; the outer size is 400 × 200 × 110 mm (15.75 × 7.87 × 4.33 in), with 11 tab-and-slot parts. Download is free.
- Formats
- SVG, DXF
- Outer size (W × D × H)
- 400 × 200 × 110 mm (15.75 × 7.87 × 4.33 in)
- Parts
- 11
- Material thickness
- 3, 4, 5 or 6 mm plywood (a file for each)
- Layout size (3 mm file)
- 1,294 × 322 mm
- Cut length
- 8.33 m
- Est. time, 10 W diode (3 mm)
- 27 min 46 s
- Est. time, 40 W CO2 (3 mm)
- 11 min 34 s
- Layers
- CUT only, no engraving
Free account required to download
How to make it
- 01Select the file for your plywood thickness and confirm the slot fit with a quick test cut.
- 02Cut the 11 parts and line up the three cross dividers (83, 80 and 99.2 mm) in the order of the columns they fill.
- 03Push the three long dividers into the base, slot each cross divider into its column, then fit the back, sides and the 77 mm front.
- 04Sand and lacquer, then fill the wide left bay with pads and the six smaller bays with liners, tampons and wipes.
Seven bays and a gentle slope
Most boxes in this set drop to half their height at the front. This one only drops from 110 mm to 77 mm, so it reads almost like a straight tray and holds more in the front row. Three long dividers make four columns. The left column is the widest and stays open front to back for a deep stack of pads. The other three each have a cross divider, so they form a back and a front compartment: liners in the first column, two rows of tampons in the second, and two packs of wipes in the third. The doubled columns keep a spare row behind the one in use.
Assembly
The 11 parts are front, back, two sides, base, three long dividers (200 × 110 mm) and three cross dividers of different lengths: 83, 80 and 99.2 mm. Each cross divider fits only its own column, so lay them out in order as they come off the bed. Seat the long dividers in the base, drop each cross divider into its column, then add the walls. The 3 mm file takes about 27 min 46 s on a 10 W diode, about 11 min 34 s on a 40 W CO2 and about 5 min 33 s on a 100 W CO2. Its layout is 1294.2 × 322 mm, so plan two or three sheets on a typical hobby bed.
Finishing and sets
At 110 mm tall with a fairly high front, the tray also fits into a deep vanity drawer. Seal it with water-based lacquer for easy wiping. Sell it as part of a bathroom set with a cotton pad holder and a hair tie tray, or as a stocked supply station for a salon or gym changing room.
Questions about this file
Will this tray fit in a drawer?
It is 400 × 200 × 110 mm with a 77 mm front, so it suits deep vanity drawers with at least 110 mm of inside height.
Why does each column have two compartments?
A cross divider in each of the three right columns gives you a front bay in use and a back bay for spares of the same product.
Which plywood thickness should I pick for a drawer tray?
3 mm is the light, fast option; 4 mm feels better for a tray that slides in and out of a drawer. The 5 and 6 mm files suit CO2 lasers.
Would white acrylic suit this seven-bay tray?
Yes, white or frosted acrylic in the matching thickness works and is easy to clean. Test one slot first, as acrylic has no give.
Should the cross dividers be glued in?
They hold well dry. A drop of glue in each base slot is worth it if the tray slides in and out of a drawer every day.
Similar files
