VisualizationNine Compartment Hair Accessory Box SVG, 3x3 Grid Organizer, Laser Cut Claw Clip and Scrunchie Tray DXF
A nine-compartment plywood box for hair accessories, 310 × 290 × 90 mm (12.20 × 11.42 × 3.54 in), laid out as a 3×3 grid with sides sloping from 90 mm to a 58 mm front. Free SVG and DXF files for 3, 4, 5 and 6 mm plywood are included; the 13 parts fit together with tabs and slots.
- Formats
- SVG, DXF
- Outer size (W × D × H)
- 310 × 290 × 90 mm (12.20 × 11.42 × 3.54 in)
- Parts
- 13
- Material thickness
- 3, 4, 5 or 6 mm plywood (a file for each)
- Layout size (3 mm file)
- 1,231 × 475 mm
- Cut length
- 9.27 m
- Est. time, 10 W diode (3 mm)
- 30 min 55 s
- Est. time, 40 W CO2 (3 mm)
- 12 min 53 s
- Layers
- CUT only, no engraving
Free account required to download
How to make it
- 01Choose the file for your plywood thickness and cut one cross-divider slot on scrap; with eight dividers a good fit really matters.
- 02Cut the 13 parts in three groups: base, outer walls, then all dividers.
- 03Assemble base, sides and back, add both long dividers, then the six cross dividers with the taller ones toward the back, and close with the front.
- 04Seal with polyurethane and fill the nine pockets with clips, scrunchies, pins, combs and headbands.
A 3×3 grid
This is the deepest box in the hair range at 290 mm, and it has the most pockets: nine, in three rows of three. Two long dividers run front to back, and six short cross dividers (two in each column) split them into rows. The cross dividers come in two heights, so each row sits a little lower than the one behind it. In the photo the back row holds a pink claw clip, a pink scrunchie and a tortoiseshell clip; the middle row has bobby pins, a cream scrunchie and a pink comb; the front row has two headbands, a clear claw clip and a brown velvet scrunchie.
The square shape (310 × 290 mm) makes it a good fit for a corner of a bathroom counter.
Cutting nine pockets
With 13 parts this is the biggest cut in the range. The 3 mm file takes about 30 min 55 s on a 10 W diode, about 12 min 53 s on a 40 W CO2 and about 6 min 11 s on a 100 W CO2. The layout is 1230.6 × 475.2 mm for 3 mm, so on nearly any desktop machine you will cut it in three sheets: base; front, back and sides; then the eight dividers. A diode manages 3 mm well; 5 and 6 mm are realistic only with a CO2 or many passes.
Build the shell, add the two long dividers, then the six cross dividers column by column: the taller ones nearer the back, the lower ones in front. Finish with the front wall. Glue is optional, but on a nine-pocket grid a little glue on the long dividers keeps everything tight.
Finishing and sets
Seal with two coats of water-based polyurethane for a bathroom. The grid is ideal for a hair accessory seller's stock display or a gift box with nine accessories inside, one per pocket.
Questions about this file
How big is each of the nine pockets?
Each pocket is roughly 100 mm wide and a third of the depth, enough for a claw clip, a scrunchie or a short comb.
Why are some cross dividers taller than others?
They follow the slope of the box. The taller set separates the back and middle rows, the lower set separates the middle and front rows.
Can it be cut in acrylic?
Yes, pick the file for your acrylic thickness. A clear acrylic grid makes a neat display for clips in a shop.
Will it hold up in a steamy bathroom?
Plywood sealed with water-based polyurethane on all faces copes well with steam; reapply if the finish wears.
Can I leave out some cross dividers for bigger pockets?
Yes, skip any cross divider to join two pockets into one longer space. The walls and long dividers still hold the box together.
Similar files
