VisualizationTiered Skincare Organizer SVG, Nine Compartment Bathroom Counter Box Laser Cut, Large Cosmetic Grid DXF
A tiered skincare organizer with nine compartments in three rows of three that rise toward the back, supplied as SVG and DXF with separate files for 3, 4, 5 and 6 mm plywood. It measures 290 × 280 × 110 mm (11.42 × 11.02 × 4.33 in), is the largest box in the skincare set at 13 pieces, and has a sloped front 61 mm high. It goes together with tabs and slots and is a free download.
- Formats
- SVG, DXF
- Outer size (W × D × H)
- 290 × 280 × 110 mm (11.42 × 11.02 × 4.33 in)
- Parts
- 13
- Material thickness
- 3, 4, 5 or 6 mm plywood (a file for each)
- Layout size (3 mm file)
- 1,160 × 516 mm
- Cut length
- 9.24 m
- Est. time, 10 W diode (3 mm)
- 30 min 48 s
- Est. time, 40 W CO2 (3 mm)
- 12 min 50 s
- Layers
- CUT only, no engraving
Free account required to download
How to make it
- 01Pick the file for your plywood thickness, plan the 1160 × 516 mm layout over up to three sheets, and cut a test slot.
- 02Cut the 13 parts: front, back, two sloped sides, base, two cross dividers of different heights and six short dividers.
- 03Assemble the grid from the back: back-row dividers, tall cross divider, middle-row dividers, low cross divider, front-row dividers; then add the back, sides and front.
- 04Sand, seal against moisture, and load the rows with tall items at the back and jars at the front.
Three rows, three cells each
This is the biggest organizer in the skincare group and the only one with a full three-by-three grid. Two cross dividers of different heights divide the 280 mm depth into a front, a middle and a back row, each a step higher than the one before. Six short dividers, two per row, split every row into three cells, nine in total. The back wall is 110 mm and the front 61 mm.
On the stone bathroom counter in the photo, the back row holds pink sheet masks, two serums and green sheet masks. The middle row has a white cream jar, cotton pads and a pink jar, and the front row three more jars, one with a silver lid. A whole shelf of skincare fits in one footprint about the size of a dinner plate.
Bed size and cutting time
The 3 mm layout is 1160 × 516 mm, the largest sheet in this category, so most hobby machines will need three sheets: the near-square base on one, the walls on a second, the two cross dividers and six short dividers on a third. For the 3 mm file allow about 30 min 48 s on a 10 W diode, about 12 min 50 s on a 40 W CO2 and about 6 min 10 s on a 100 W CO2. On a diode, 5 and 6 mm plywood takes several passes; a CO2 is the practical choice for thick sheets.
Assembly order and finish
Build the grid inside the base row by row: the two back-row dividers, the taller cross divider, the middle dividers, the lower cross divider and the front dividers. Then add the back, the sides and the front. A drop of wood glue in each short divider slot keeps the grid rigid. Seal it with water-based varnish for a bathroom.
For a craft fair, fill it with sample-size products so customers see the scale.
Questions about this file
How much does it hold?
Nine compartments: three tall back cells for masks and serums, and six lower cells in the middle and front rows for jars and cotton pads.
Is it too big for my laser?
The full layout is 1160 × 516 mm, but every piece is separate, so you can cut it on a smaller bed across two or three sheets.
Can I scale it down to fit a drawer?
Shrink the drawing, then reset all slot widths to your sheet thickness so the six short dividers still lock in.
Which material should I choose?
4 mm birch plywood suits a box this large; MDF works if painted and sealed, and acrylic needs the file for its exact thickness.
Can I engrave labels on the cells?
Yes, add small text to the front panel or the cross dividers in your software before cutting; the file has no engraving.
Similar files
